Nuvo manual Series NV-E6MS/NV-E6XS

Page 1

CD1

ALL OFF

ON•OFF

CD2

MUTE

SAT

VOL

TUN1

VOL

TUN2

TUN3

E SERIES NV-E6MS/NV-E6XS

MULTI - SOURCE/ MULTI - ZONE AUDIO DISTRIBUTION SYSTEM OWNER’S MANUAL

Image 1

Contents Series NV-E6MS/NV-E6XS Nuvo Technologies Inc NV-E6XS Expander Audio Distribution System Description NV-E6MS Main Audio Distribution System DescriptionSeries Amplifier Front 3 4 5 Series Amplifier Back PanelSeries Keypad IR Emitter Nuvo RC1 Remote ControlPin # Installing and Terminating CablesIII. Connecting the E6M to the E-Z Port II. Installing the E-Z Port HubCat-5 cables from keypads IV. Attaching Source Equipment to the E6M Connecting the IR EmittersVII. Installing the NV-EKP Keypads VI. Connecting the E6M to the E6XE6M Amplifier NV-DI3 Datalink Cable NV-AI2 Audiolink CableDIP switches Zone VIII. Setting the NV-EKP DIP Switches+4dB Boost At 100Hz and 10kHz Flat Response Switches 5 & 6, Zone EQ Presets +4dB Boost At 100Hz At 10kHzNV-RC1 Remote Learning Remote Using the Mute and Unit On PinsXI. MPU Diagnostic LEDs XIII. NV-MI1 Mute Interface XII. Changing the Buttons on the NV-EKPMI1 is not supplied with the E6M or the E6X packages Symptom Probable Cause TroubleshootingWarranty Nuvo NV-E6M SpecificationsDelhi Pike, Cincinnati, OH USA