Kenwood FP591 To use the cutting discs, Care & cleaning, Service & customer care, Citrus press

to use the cutting discs

1	Fit the drive shaft and bowl onto the power unit.		d
2	Holding by the centre grip d , place the disc onto the	e
	drive shaft with the appropriate side uppermost e .
3	Fit the lid.
4	Choose which size feed tube you want to use. The
	pusher contains a smaller feed tube for processing
	individual items or thin ingredients.
	To use the small feed tube - first put the large pusher
	inside the feed tube.		P
	To use the large feed tube - use both pushers
		2	3 4 5 6
	together.	1	7
		0	8

5Put the food in the feed tube.

6Switch on and push down evenly with the pusher - never put your fingers in the feed tube.

hints

●Use fresh ingredients

●Don’t cut food too small. Fill the width of the large feed tube fairly full. This prevents the food from slipping sideways during processing. Alternatively use the small feed tube.

●When using the chipper disc, place ingredients horizontally.

●When slicing or shredding: food placed upright f comes out shorter than food placed horizontally g.

●There will always be a small amount of waste on the plate or in the bowl after processing.

f g

	P		P
2	3 4 5 6	2	3 4 5 6
1	7	1	7
0	8	0	8

care & cleaning

●Always switch off and unplug before cleaning.

●Handle the blades and cutting discs with care - they are extremely sharp.

●Some foods may discolour the plastic. This is perfectly normal and won’t harm the plastic or affect the flavour of your food. Rub with a cloth dipped in vegetable oil to remove the discolouration.

power unit

●Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food debris.

●Store excess cord in the storage area at the back of the machine.

liquidiser/mill

1Empty the jug/jar before unscrewing it from the blade unit.

2Wash the jug/jar by hand.

3Remove and wash the sealing ring.

4Don’t touch the sharp blades - brush them clean using hot soapy water, then rinse thoroughly under the tap. Don’t immerse the blade unit in water.

5Leave to dry upside down.

twin beater geared whisk

●Detach the beaters from the drive head by gently pulling them free. Wash in warm soapy water.

●Wipe the drive head with a damp cloth, then dry. Do not immerse the drive head in water.

all other parts

●Wash by hand, then dry.

●Alternatively they can be washed on the top rack of your dishwasher.

service & customer care

●If the cord is damaged it must, for safety reasons, be replaced by Kenwood or an authorised Kenwood repairer.

If you need help with:

●Using your machine

●Servicing or repairs

Contact the shop where you brought the food processor.

citrus press

Use the citrus press to squeeze the juice from citrus fruits (eg oranges, lemons, limes and grapefruits).

cone sieve

to use the citrus press

1Fit the drive shaft and bowl onto the power unit.

2Fit the sieve into the bowl - ensuring the sieve handle is locked into position directly over the bowl handle h .

3Place the cone over the drive shaft turning until it drops all the way down i .

4Cut the fruit in half. Then switch on and press the fruit onto the cone.

●The citrus press will not operate if the sieve is not locked correctly.

i

h

	P
2	3 4 5 6
1	7
0	8

4