Hobart HPGF15 manual Daily Cleaning Stainless Steel, Aluminum Kettle

Page 17

BACK KNOB

DIAPHRAGM

 

PL-41596-2

Fig. 12

Fig. 13

PL-41468-1

11.Continue with the cleaning instructions described in the CLEANING section of this manual.

12.Close drain valve and return oil to kettle.

13.Remove drain elbow.

14.Check oil level. The fryer is ready for the next production period.

CLEANING

WARNING: UNPLUG ELECTRICAL POWER SUPPLY BEFORE CLEANING.

Daily Cleaning

Stainless Steel

Clean stainless steel regularly with a damp cloth and polish with a soft, dry cloth. If regular cleaning is neglected, grease will be burned on and discolorations may form. These may be removed by washing with any mild detergent or soap and water. Particularly stubborn discolorations may be removed with a self-soaping scouring pad or a paste made of water and a mild scouring powder applied with a plastic open pad or sponge. CAUTION: Always rub with the grain in a horizontal direction.

Do not use bleach or products containing bleach.

It is important to keep the fryer exterior clean and free of accumulated grease. Wash all exterior surfaces at least once daily. Use a cloth with warm water and a mild soap or detergent. Follow with a clear rinse, then dry.

Aluminum Kettle

See cleaning procedure for Model HPGF15 under FILTERING OIL AT THE END OF THE PRODUCTION DAY.

– 17 –

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Truct For Your Safety Important for Your SafetyTable of Contents Unpacking InstallationLocation Installation Codes and StandardsAssembly Installing Casters GAS Connections Exhaust PipeFlue Connections Testing the GAS Supply SystemElectrical Connections Lighting InstructionsPL-40937-1 PL-40936-1 Before First USE OperationTurning the Fryer on Filling the Kettle with Liquid ShorteningFrying Procedure for ALL Foods Power Failure HIGH-LIMIT SwitchTurning the Fryer OFF Extended ShutdownSuggested Cooking Guide PRESSURE-RELIEF ValveTemp FoodOther Items Which May Be Prepared in the Pressure Fryer Using the HMF50 or HMF85 FilterTemp Time Food MinFiltering Oil at the End of the Production Day Aluminum Kettle CleaningDaily Cleaning Stainless Steel Weekly Cleaning More Often if Required Solenoid Assembly Fig Cleaning After Every Production Period Exhaust TankKettle Tilt Lid Pressure-Relief Valve Monthly Cleaning Exhaust TankRemove Bolt LID O-RING Seal Replacement MaintenanceOther O-RING Seal Replacements Kettle Pressure-Regulator AssemblyVent Cleaning Port Plug ScrewLid will not lock do not Operate Fryer TroubleshootingSymptom Possible Causes
Top Page Image Contents