Hobart HPGF15 manual Maintenance, LID O-RING Seal Replacement, Other O-RING Seal Replacements

Page 22

MAINTENANCE

WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER.

WARNING: SPILLING HOT FRYING COMPOUND CAN CAUSE SEVERE BURNS. DO NOT MOVE FRYER WITHOUT DRAINING ALL FRYING COMPOUND FROM THE TANK.

WARNING: UNPLUG ELECTRICAL POWER SUPPLY BEFORE PERFORMING ANY MAINTENANCE.

LID O-RING SEAL REPLACEMENT

Removal and replacement instructions for the lid O-Ring are described in the CLEANING section of this manual under KETTLE TILT LID.

OTHER O-RING SEAL REPLACEMENTS

Kettle Pressure-Regulator Assembly

The O-Ring seal on the kettle pressure-regulator assembly (Fig. 23) needs to be replaced if oil is leaking from the kettle lid. If steam leaks around the kettle pressure-regulator O-Ring and goes into the exhaust tank, pressure will not build in the kettle. Dip the new O-Ring in oil for lubrication and insert it into the groove.

KETTLE PRESSURE -

REGULATOR ASSEMBLY

O - RING SEAL

PL-40911-1

Fig. 23

– 22 –

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Truct Important for Your Safety For Your SafetyTable of Contents Installation UnpackingAssembly Installation Codes and StandardsLocation Installing Casters Exhaust Pipe GAS ConnectionsElectrical Connections Testing the GAS Supply SystemFlue Connections Lighting InstructionsPL-40937-1 PL-40936-1 Operation Before First USEFilling the Kettle with Liquid Shortening Turning the Fryer onFrying Procedure for ALL Foods Turning the Fryer OFF HIGH-LIMIT SwitchPower Failure Extended ShutdownTemp PRESSURE-RELIEF ValveSuggested Cooking Guide FoodTemp Time Food Using the HMF50 or HMF85 FilterOther Items Which May Be Prepared in the Pressure Fryer MinFiltering Oil at the End of the Production Day Daily Cleaning Stainless Steel CleaningAluminum Kettle Cleaning After Every Production Period Exhaust Tank Weekly Cleaning More Often if Required Solenoid Assembly FigKettle Tilt Lid Monthly Cleaning Exhaust Tank Pressure-Relief ValveRemove Bolt Other O-RING Seal Replacements MaintenanceLID O-RING Seal Replacement Kettle Pressure-Regulator AssemblyCleaning Port Plug Screw VentSymptom Possible Causes TroubleshootingLid will not lock do not Operate Fryer
Top Page Image Contents