DECATHLON SERIES GAS FRYERS
CHAPTER 1: SERVICE PROCEDURES
1.7 Replacing Fryer Components
1.7.1 Replacing the Computer
1.Disconnect the fryer from the electrical supply.
2.Unscrew the two computer panel screws. The computer panel is hinged at the bottom and will swing open from the top.
Computer panel in “down” position.
3.Unplug the fryer wiring harness and ground wire from the back of the computer.
Disconnect the
4.Remove the computer by lifting it from the hinge slots in the fryer control panel frame.
5.Reverse the procedure to install a new computer.
Control panel frame with computer removed.