Frymaster KSCFH18E operation manual Rating Plate

Page 9

KSCFH18E COOL ZONE SERIES ELECTRIC FRYERS

CHAPTER 2: IMPORTANT INFORMATION

2.1 General (cont.)

DANGER

Frymaster appliances equipped with legs are for stationary installations. Appliances fitted with legs must be lifted during movement to avoid damage to the appliance and bodily injury. For movable installations, optional equipment casters must be used. Questions? Call 1-800-551-8633.

WARNING

Do not attach accessories to this fryer unless fryer is secured from tipping.

Personal injury may result.

WARNING

No structural material on the fryer should be altered or removed to accommodate placement of the fryer under a hood. Questions? Call the Frymaster/Dean Service Hotline at 1-800-551-8633.

All installation and service on Frymaster equipment must be performed by qualified, certified, licensed, and/or authorized installation or service personnel.

Service may be obtained by contacting your local Factory Authorized Service Center.

The KSCFH18E Electric Cool Zone Fryers are energy-efficient, electrically heated units, certified by Underwriters Laboratory and manufactured to their basic performance and application specifications. The KSCFH18E is certified for installation and operation in the European Community (CE).

All units are shipped completely assembled with accessories packed inside the frypots. All units are adjusted, tested and inspected at the factory before shipment.

WARNING

The on-site supervisor is responsible for ensuring that operators are made aware of the inherent dangers of operating a hot oil fryer/filter system, particularly the aspects of fryer operation, oil filtration, and draining/cleaning procedures.

2.2 Rating Plate

Information on this plate includes the model and serial numbers, as well as electrical requirements. When communicating with the factory about a unit or requesting special parts or information, this data is essential for proper identification.

2-2

Page 8 Page 10
Image 9
Page 8 Page 10
Contents
Parts List Included NON-CE Canada Page KSCFH18E Cool Zone Series Electric Fryers Ordering Parts Service InformationComputer Information Safety InformationDefinitions Service PersonnelGeneral Rating Plate Unpacking the Fryer/Component Systems Pre-InstallationConversion of Units TemperatureLeg and Caster Installation Installing the FryerLegs Only Leveling the FryerElectrical Connections Operating Switches Power RequirementsDrain valve microswitch location Drain and Oil-Return Handles Final Preparation Initial Cleaning Before StartupShortening Opening Start-up ProceduresGeneral Use FilteringShutdown ClosingWeekly DailyBuilt-in Filtration Periodic/AnnualStainless Steel Periodic/ AnnualFilter Preparation Place drip pan under male filter pan connection Unlatch and remove the hold-down ring Vent hole location on pickup tube Sprinkle 1-cup 8 ounces/227 grams evenly over the paper Return pan covers to the filter pan UFF Filter Operations Filter Operation Frypot refilling with filtered shortening/oil Frypot Introduction KSCFH18E Cool Zone Series Electric Fryers TroubleshootingPressed Fryer TroubleshootingCont Temperature Probe High-limit Computer is ON, but Filtration System Troubleshooting Diagrams WiringUnder Fryer Filter UFF Wiring Diagram Fast Wiring Diagram KSCFH18E Parts List KSCFH18E Cool Zone Series Electric Fryers Parts ListKSCFH18E Cool Zone Series Electric Fryers Parts List Component Box, Computers and Related Components KSCFH18E Cool Zone Series Electric Fryers Parts List Elements and Related Components Item # Description Tilt Safety Switch Components Frypot and Drain Components KSCFH18E Cool Zone Series Electric Fryers Parts List Filter Pan, Pump Motor and Related Components KSCFH18E Cool Zone Series Electric Fryers Parts List Oil Return Components Item # Description This page Intentionally Left Blank Service Hotline
Top Page Image Contents