
Vehicle Installation
•Sedan/Coupe With Antenna Placed at the Front of the Roof:
1.Feed the antenna cable from the antenna underneath the rubber molding around the windshield.. Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the windshield and tuck the antenna cable underneath the molding.. Route the antenna cable around and down the windshield to the lowest point..
2.At the lowest corner of the windshield, route the cable out of the
windshield molding and into the rubber weather stripping around the door opening.. Lift the weather stripping from the opening and tuck the cable inside it,
then replace the weather
stripping.. Run the cable inside of the weather
stripping to the bottom of the door opening..
3. Pull the cable out of the weather stripping at
the bottom of the door
opening and route it under the carpet toward the dashboard.. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls.. Secure the excess cable with wire ties..
4.Bring the end of the cable out at the PowerConnect Vehicle Dock location.. Leave yourself enough cable so you can easily connect it to the antenna connector of the dock..
32