XM Satellite Radio XDNX1UG, XDNX1V1 manual Enu

tool counter-clockwise until it will not rotate any further..

3The Trim Ring is now loose.. Turn the onyX over and the Trim Ring should fall out.. If it does not, gently tap the back of the radio until it does..

4Turn the radio face up again and insert the new Trim Ring into the radio..

5Align the Trim Ring Removal Tool on the Trim Ring on the radio.. Use care to align the tool so it’s centered on the Trim Ring..

										menu
										FM
										jump
1	2	3	4	5	6	7	8	9	0	direct

6Using mild pressure to keep the tool against the Trim Ring, rotate the tool clockwise until it will not rotate any further.. The new Trim Ring is now installed..

67