
Troubleshooting
If this happens:
Try this:
No audio when using the Aux In | • Check all cables between your onyX and your |
Cable or Cassette Adapter | vehicle’s stereo system for a firm and secure |
| connection.. |
| • Ensure you have selected the proper input source |
| on your vehicle’s stereo system.. |
| • If you are using the Vehicle Dock that came with |
| the Universal Xpress Car Kit, ensure that the FM |
| Transmitter in the onyX is turned Off, and increase |
| the audio level of the onyX.. Refer to “Set Audio |
| Level” on page 89.. |
|
|
Audio fades or has static when | • Check all cables for a firm and secure connection.. |
listening | • If you are using PowerConnect to listen via your |
| vehicle’s FM radio, and the problem persists, it |
| most likely is interference from another commercial |
| or broadcast FM station.. You will need to find an |
| unused or available FM channel in your area.. Refer |
| to “Find Available FM Channels in Your Area” on |
| page 79.. |
| • If you are using PowerConnect, and you cannot |
| solve the audio problem, try connecting the audio |
| using the Aux In Cable or a Cassette Adapter.. |
| (Refer to page 39 and page 41..) If you cannot use those |
| solutions, consider using an FM Direct Adapter.. |
| (Refer to page 47..) |
|
|