Jenn-Air LI3V3A Installation Instructions, Prepare Location, Determine Wiring Hole Location

Page 7

INSTALLATION INSTRUCTIONS

Prepare Location

It is recommended that the vent system be installed before hood is installed.

If you are installing an optional backsplash or full width duct cover, follow the instructions included with that product.

Before making cutouts, make sure there is proper clearance within the ceiling or wall for exhaust vent.

Check your ceiling height and the hood height maximum before you select your hood.

1.Disconnect power.

2.Determine which venting method to use: roof, wall, or non- vented.

3.Select a flat surface for assembling the range hood. Place covering over that surface.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range hood.

Failure to do so can result in back or other injury.

4.Using 2 or more people, lift range hood onto covered surface.

NOTE: This range hood can be mounted to the cabinets or to the wall.

For Cabinet Installations

1.If cabinet has recessed bottom, add wood filler strips on each side. Install screws to attach filler strips in locations shown.

Wood filler strips (recessed cabinet bottoms only)

3" (7.6 cm)

Cabinet

bottom

3" (7.6 cm)

Wall

Determine Wiring Hole Location

Cut only one 1¹⁄₄" (3.2 cm) diameter wiring access hole. See Step 2 for wiring hole location instructions.

1.Determine and clearly mark a vertical centerline on the wall and cabinet in the area the vent opening will be made.

A

A.Centerline

2.To wire through top:

Mark a line distance “A” from the left of the centerline on the underside of the cabinet. Mark the point on this line that is 7⁷⁄₈" (20.0 cm) from back wall. Drill a 1¼" (3.2 cm) diameter hole through the cabinet at this point.

A

7⁷⁄₈" (20.0 cm)

from wall,

 

not cabinet

 

frame

Centerline

A. 12³⁄₁₆" (31.0 cm)

Cut Openings for 3¼" x 10" (8.3 cm x 25.4 cm) Rectangular Vent System

Roof Venting

To make a 3½" x 10½" (8.9 cm x 26.7 cm) rectangular cutout on the underside of cabinet top and bottom:

1.Mark lines ³⁄₈" (1.0 cm) and 3⁷⁄₈" (9.8 cm) from the back wall on the centerline of the underside of cabinet.

2.Mark lines 5¼" (13.3 cm) to the right and left of the centerline on the underside of cabinet.

3.Use saber or keyhole saw to cut a rectangular opening for vent.

7

Image 7
Contents LI3V3A/W10274318A 30 ET 36 76,2 CM ET 91,4 CMTable of Contents Range Hood SafetyImportant Safety Instructions Tools and Parts Installation RequirementsLocation Requirements Venting Requirements Calculating Vent System Length Electrical RequirementsRear discharge Example vent systemPrepare Location Installation InstructionsDetermine Wiring Hole Location To wire through topTo make a 3½ x 10½ 8.9 cm x 26.7 cm rectangle in the wall Wall Venting Under CabinetMake Electrical Connection Install Range HoodComplete Preparation Range Hood Controls Install Vent Covers OptionalComplete Installation Range Hood USEMetal Grease Filter CleaningRange Hood Care Exterior SurfacesWiring Diagram Canada Assistance or ServiceAccessories U.S.AThis limited warranty does not cover JENN-AIRMAJOR Appliance WarrantyVotre sécurité et celle des autres est très importante Sécurité DE LA Hotte DE CuisinièreImportantes Instructions DE Sécurité Exigences d’emplacement Exigences DinstallationOutils et pièces Pour un fonctionnement efficace et silencieux Dimensions du produit Dimensions du placard Vue de faceExigences concernant l’évacuation Vue arrièreCalcul de la longueur effective du circuit d’évacuation Installations dans les régions au climat froidAir d’appoint Méthodes d’évacuationPréparation de lemplacement Instructions DinstallationSpécifications électriques Câblage à travers le sommet du placard Déterminer l’emplacement du trou de passage du câbleDécharge à travers le toit Décharge à travers le mur sous un placardAchever la préparation Installation de la hotteRaccordement électrique Utilisation DE LA Hotte Installation des cache-conduits facultatifAchever l’installation Commandes de la hotte de cuisinièreSurfaces externes Remplacement d’une lampe à halogèneEntretien DE LA Hotte NettoyageSchéma DE Câblage Accessoires Assistance OU Service2009 All rights reserved W10274318A

LI3V3A, W10274318A specifications

The Jenn-Air LI3V3A is a state-of-the-art built-in refrigerator that exemplifies the blend of style and performance, designed to meet the demands of modern kitchens. One of its standout features is the sleek, integrated design that allows it to seamlessly blend into your cabinetry, creating a cohesive look while providing unmatched functionality.

With a net capacity of 20.5 cubic feet, the LI3V3A provides ample space for both fresh and frozen foods. Its innovative layout includes adjustable shelves and a spacious crisper drawer, making it easy to organize and access your groceries. The refrigerator features a special TriCooling system, which utilizes three separate cooling systems to maintain ideal temperature and humidity levels in each compartment. This ensures that fruits, vegetables, and perishable items stay fresher for longer, reducing food waste and preserving flavor.

The LI3V3A also integrates advanced technologies like the Dual Evaporator system. This feature prevents the mixing of air between the refrigerator and freezer compartments, thereby maintaining optimal humidity levels and preventing the transfer of odors. Additionally, this refrigerator boasts a noticeable reduction in energy consumption, thanks to its Energy Star certification; a testament to its efficiency and environmentally conscious design.

Another significant characteristic is its innovative internal water filtration system, featuring a water and ice dispenser that provides convenient access to chilled water and ice cubes. The refrigerator’s water filter is easy to access, making it simple to replace when needed, ensuring clean and safe drinking water at all times.

The user-friendly touchscreen control panel simplifies settings adjustments, allowing users to easily modify temperature settings, control the ice maker, and monitor filter status. Moreover, features like door alarms remind users when the door is left open, helping to maintain the cold inside and enhancing energy efficiency.

Overall, the Jenn-Air LI3V3A, W10274318A model stands out not just for its aesthetic appeal but also for its robust functionality, energy efficiency, and commitment to food preservation. This makes it an ideal choice for anyone seeking a high-performance refrigerator that enhances both the kitchen's style and the quality of its contents.