Jenn-Air LI3V3A, W10274318A Range Hood Care, Cleaning, Exterior Surfaces, Metal Grease Filter

Page 11

RANGE HOOD CARE

Cleaning

IMPORTANT: Clean the hood and grease filters frequently according to the following instructions. Replace grease filters before operating hood.

Exterior Surfaces:

To avoid damage to the exterior surface, do not use steel wool or soap-filled scouring pads.

Always wipe dry to avoid water marks.

Cleaning Method:

Liquid detergent soap and water, or all-purpose cleanser

Wipe with damp soft cloth or nonabrasive sponge, then rinse with clean water and wipe dry.

Metal Grease Filter

To Remove Metal Grease Filters:

1.Use 2 hands to remove the metal grease filters. Grasp filter handles, push toward the rear of the range hood and pull down on the front handle to remove.

2.Repeat for each grease filter.

3.Wash metal grease filters as needed in a dishwasher or hand wash in a hot detergent solution to clean.

To Reinstall Metal Grease Filters:

1.Grasp filter handles and place rear of filter into rear track.

2.Push down on the rear handle and set the front of the grease filter into the front track to secure.

3.Repeat for each filter.

Replacing a Halogen Lamp

Turn off the range hood and allow the halogen lamp to cool. To avoid damage or decreasing the life of the new bulb, do not touch bulb with bare fingers. Replace bulb, using tissue or wearing cotton gloves to handle bulb.

If new lamps do not operate, make sure the lamps are inserted correctly before calling service.

1.Disconnect power.

2.Push up on the lens and turn it counterclockwise.

3.Remove the bulb and replace it with a 120-volt, 50-watt maximum halogen bulb with a GU10 base. Turn it clockwise to lock it into place.

4.Repeat steps 2-3 for the other bulb if needed.

5.Reconnect power.

11

Image 11
Contents LI3V3A/W10274318A 30 ET 36 76,2 CM ET 91,4 CMTable of Contents Range Hood SafetyImportant Safety Instructions Location Requirements Installation RequirementsTools and Parts Venting Requirements Calculating Vent System Length Electrical RequirementsRear discharge Example vent systemPrepare Location Installation InstructionsDetermine Wiring Hole Location To wire through topTo make a 3½ x 10½ 8.9 cm x 26.7 cm rectangle in the wall Wall Venting Under CabinetComplete Preparation Install Range HoodMake Electrical Connection Range Hood Controls Install Vent Covers OptionalComplete Installation Range Hood USEMetal Grease Filter CleaningRange Hood Care Exterior SurfacesWiring Diagram Canada Assistance or ServiceAccessories U.S.AThis limited warranty does not cover JENN-AIRMAJOR Appliance WarrantyVotre sécurité et celle des autres est très importante Sécurité DE LA Hotte DE CuisinièreImportantes Instructions DE Sécurité Outils et pièces Exigences DinstallationExigences d’emplacement Pour un fonctionnement efficace et silencieux Dimensions du produit Dimensions du placard Vue de faceExigences concernant l’évacuation Vue arrièreCalcul de la longueur effective du circuit d’évacuation Installations dans les régions au climat froidAir d’appoint Méthodes d’évacuationSpécifications électriques Instructions DinstallationPréparation de lemplacement Câblage à travers le sommet du placard Déterminer l’emplacement du trou de passage du câbleDécharge à travers le toit Décharge à travers le mur sous un placardAchever la préparation Installation de la hotteRaccordement électrique Utilisation DE LA Hotte Installation des cache-conduits facultatifAchever l’installation Commandes de la hotte de cuisinièreSurfaces externes Remplacement d’une lampe à halogèneEntretien DE LA Hotte NettoyageSchéma DE Câblage Accessoires Assistance OU Service2009 All rights reserved W10274318A

LI3V3A, W10274318A specifications

The Jenn-Air LI3V3A is a state-of-the-art built-in refrigerator that exemplifies the blend of style and performance, designed to meet the demands of modern kitchens. One of its standout features is the sleek, integrated design that allows it to seamlessly blend into your cabinetry, creating a cohesive look while providing unmatched functionality.

With a net capacity of 20.5 cubic feet, the LI3V3A provides ample space for both fresh and frozen foods. Its innovative layout includes adjustable shelves and a spacious crisper drawer, making it easy to organize and access your groceries. The refrigerator features a special TriCooling system, which utilizes three separate cooling systems to maintain ideal temperature and humidity levels in each compartment. This ensures that fruits, vegetables, and perishable items stay fresher for longer, reducing food waste and preserving flavor.

The LI3V3A also integrates advanced technologies like the Dual Evaporator system. This feature prevents the mixing of air between the refrigerator and freezer compartments, thereby maintaining optimal humidity levels and preventing the transfer of odors. Additionally, this refrigerator boasts a noticeable reduction in energy consumption, thanks to its Energy Star certification; a testament to its efficiency and environmentally conscious design.

Another significant characteristic is its innovative internal water filtration system, featuring a water and ice dispenser that provides convenient access to chilled water and ice cubes. The refrigerator’s water filter is easy to access, making it simple to replace when needed, ensuring clean and safe drinking water at all times.

The user-friendly touchscreen control panel simplifies settings adjustments, allowing users to easily modify temperature settings, control the ice maker, and monitor filter status. Moreover, features like door alarms remind users when the door is left open, helping to maintain the cold inside and enhancing energy efficiency.

Overall, the Jenn-Air LI3V3A, W10274318A model stands out not just for its aesthetic appeal but also for its robust functionality, energy efficiency, and commitment to food preservation. This makes it an ideal choice for anyone seeking a high-performance refrigerator that enhances both the kitchen's style and the quality of its contents.