Other Hints On Caring For Your Refrigerator
[ Replacing Light Bulbs ]
it is recommended that you disconnect the power cordbefore replacing light bulb:
To replace the upper refrigerator light bulb: (t) grasp the lightshield nearthe ends an pull out until the shield pulls free of the retainer lugs; (2) unscrew bulb and replace wil a 40 watt appliance bulb (60 watt appliance bulb for Model JRS207, JRSD2250 ar JRSD2450); and (3) hook the light shield over the upper retainer lugs and press in ; the bottom until the shield snaps in place.
To replace the lower refrigerator light bulb on some models: (1) remove the Ten- Control Drawer; (2)using two hands, spread the top adbottom of the light shieldver_ica away from each other and pull to the front to remove; (3) unscrew the bulb and repla, it with a 40 watt showcase bulb; (4) using two hands, spread the top and bottom of tl
lightshield and push it into place engaging tabs in slots;and (5)replace the Temp ContJ Drawer.
To replace the freezer light bulb: (1) remove the ice cube dispenser bin and the t_ freezer shelf; (2) unhook the tabs on the top of the light shield by pressing in with yo thumb onthe center top of the light shield; (3)pivot the shield down; (4) unscrew the b, when it is cool and replace it with a standard 40 watt appliance bulb; (5) pivot the shi up into place, snapping the tabs into the slots: (6) replace the freezer shelf and the cube dispenser bin.
LGoing On Vacation ]
If you will be gone for a month or less, leave the control knob at its usual setting.
During longer absences, {a) remove all food, (b) disconnect from electrical outlet, clean the refrigerator thoroughly, including defrost pan, (d) leavedoors open to pre_ odor formation, and e) turn off water supply to ice maker, if practical
16