Shelves j, Slide-OutShelves Some models | Jenn-Air JRSDE249, JRS229

Refri

Compartment

To maintain the natural flavor, moisture, andnutrition ef fresh foods,we recommend th_ all dishes, trays, and containers of food be covered.

_Shelves j

		h
Adjustable cantilever shelves can be posi-	_ _	'_3I
tioned to suit your speciat needs. To remove		J
a shelf, lift the rear straight up a fraction of an
inch and pull straight out. To lock into another
position, tilt the shelf with the front up. Insert

hooks into desired frame openings and let the shelf settle into place. Make sure it securely locked at the rear. Some models have slide out shelves that are designed contain spiUs. Height adjustments are made the same way, being careful that ti" movable shelf remains fully in the frame.

I Slide-OutShelves (Some models) ]

Slide-out shelves move on plastic rails and may be easily pulled forward for access foods placed toward the rear. To remove a slide-out shelf, pullit toward you until it stol then lift the front edge slightly and putt completely out.

I Temp Control Drawer (Model JRS207) I

The Temp Control Draweris locatedat the bottom of the compartment. The controlle_ is loCatedalong the leftside of the drawer. As the control lever is moved from the "Co setting toward the "Cold" setting, the temperature will get colder. Select the cont

position which suits your needs the best. Keep your Temp Control Drawer tigb closed at all times to obtain best results.

Temp Control Drawer (Models JRSD209, JRS229, ] JRSD279, JRSDE249, & JRSDE229)

The Temp Control Drawer provides short term storage of fresh meats without freezi The shelf with the Temp Control Drawer can be placed in one of three positions. W! adjusting this shelf, remove the drawer and look at the back wall of the drawer. I necessary for the air inter tube at the back of the refdgerator to line up at the top, mid or bottom of the air slots in the back of the drawer. Set the temperature control to co(dest position when adjusting the Temp Control Drawer. Once adjustment has b_ made, replace the drawer and set the control to the desired setting.