Freezer Compartment
Features
To maintain the natural flavor, moisture, and nutrition of frozen foods, and to prevent freezer burn, we recommend that all foods be wrapped or sealed properly.
To remove a freezer shelf, lift the shelf straight up, tilt sideways and pull straight out. When replacing a freezer
shelf,I Freezerrev rseShelvesthe removal(ModelprocedureJRS207).I
I Adjustable Freezer Shelves (Most models) I
The freezer shelves can be adjusted up or down or __ removed to accommodate various sized packages. To :
remove a shelf, lift up on right side of shelf and push to the right. Then, tilt shelf and remove.
To replace a freezer shelf: (1) tilt the shelf and insert right rod ends into upper portion of oblong holes in the freezer
side wall; and (2) lower the left side of the shelf and insert in oblong holes in the left side of the freezer wall. Make sure the shelf is secure before loading.
[ Bulk Storage Drawer (Models JRS207,JRSD2250, JRSD2450) ]
The |
|
|
as far as it will go, then lifting the front edge and pulling straight out. | I__ | __/_/ |
If you notice that the drawer is not sliding smoothly or easily, |
|
|
lubricate the slide rails with petroleum jelly. Apply lubrication to |
|
|
points as shown. Also, make sure the bottom of the freezer is clean | I/I S.UOE_,L_/I | |
where the slide rails make contact. | _ |
|
I Bulk Storage Basket (Most Models) I | F"Z'_)°_O_C' | |
To remove the freezer basket; (1) pull the basket partially out; (2) reach to the back of the
basket and pivot the metal clips up to a horizontal position; and (3) pull the basket out, When replacing the basket, reverse the removal procedure.