Burn Hazard / HOT OIL Splash / Splatter

C.PROBLEM: FILTER PUMP WILL NOT RUN

1.Verify that the POWER SWITCH (item 1, upper control panel) is in the FILTER position, and that the FILTER PUMP SWITCH (item 6, lower control panel) is in the ON position.

2.Press the red RESET button (item 9) on the FILTER PUMP MOTOR, accessible on the back of the fryer. If the pump motor continues to trip out, or if no other cause is apparent for the pump’s failure to run, contact a Wells Mfg. Authorized Service Agency for repairs.

D.PROBLEM: FILTER RESERVOIR OVERFLOWS DURING FILTER CYCLE

CAUTION:

BURN HAZARD / HOT OIL SPLASH / SPLATTER

PROTECTIVE CLOTHING AND GLOVES MUST BE WORN

WHENEVER SERVICING THE FILTER DURING THE FILTERING

CYCLE

Hot oil may splatter, which could result in serious injury.

1.The oil level in the reservoir must be constantly monitored during the filter cycle, and the flow controlled by means of the DRAIN VALVE LEVER (item 11).

2.The surface of the FILTER PAPER may become clogged with crumbs or other debris. If this happens, turn OFF the DRAIN VALVE LEVER (item 11); when bubbles begin appearing in the oil returned to the FRYPOT, turn OFF the FILTER PUMP SWITCH (item 6).

Carefully slide the FILTER RESERVOIR out approximately 6”. Gently run the end of the WOOD CLEANOUT DOWEL across the surface of the FILTER PAPER and scrape the crumbs toward the edges. Carefully slide the FILTER RESERVOIR back into place, making sure the SUCTION TUBE is properly seated in the RECEPTACLE.

Resume filtering, but remember to replace the FILTER PAPER before the next filtering cycle.

E.PROBLEM: FILTER PUMP WON’T PUMP, or PUMPS AIR DURING FILTERING

BUBBLES in the oil while filtering, and/or a failure of the pump to achieve or maintain prime indicate that air is entering the suction side of the pump.

1.Examine the SUCTION TUBE O-RING. A damaged or improperly seated O-RING can cause the FILTER PUMP to lose suction. This will result in a failure to filter the oil, and in a failure of the oil to be returned to the FRYPOT.

Replace SUCTION TUBE O-RING if it is missing, cracked, distorted or scuffed with one of the spare O-rings.

2.Verify that he SUCTION TUBE is fully seated in the SUCTION LINE RECEPTACLE.

3.Internal component damage. Contact a Wells Mfg. Authorized Service Agency.

WFPE-30F specifications

The Bloomfield WFPE-30F is a state-of-the-art electronic coffee brewer designed to elevate the coffee brewing experience in commercial settings. This model shines with a blend of cutting-edge features, innovative technologies, and high-quality characteristics, making it a popular choice among coffee enthusiasts and professionals alike.

One of the standout features of the WFPE-30F is its impressive capacity, capable of brewing up to 30 cups of coffee at a time. This makes it ideal for busy cafes, restaurants, and offices where a steady supply of freshly brewed coffee is essential. The machine is equipped with a large, easy-to-read water level indicator, ensuring that operators can accurately measure the water required for optimal brewing results.

The WFPE-30F employs advanced digital brewing technology that allows for precise temperature control. Maintaining the perfect brewing temperature is crucial for extracting the best flavors from coffee grounds, and this brewer excels in that aspect. With adjustable brew temperature settings, users can tailor their brewing process to enhance the flavor profiles of different coffee types.

Another notable characteristic is the machine’s programmable brewing functions. Users can set specific brew times, which is especially useful for establishing a consistent coffee schedule during peak hours. This programmability also helps improve efficiency, allowing staff to focus on other tasks while the brewer takes care of coffee preparation.

The WFPE-30F is designed with ease of use in mind. Its user-friendly interface features intuitive controls, making it accessible even for those who are not tech-savvy. Additionally, the brewer's stainless-steel construction not only gives it a sleek appearance but also ensures durability and longevity, essential for any commercial equipment.

Maintenance and cleaning are straightforward with the Bloomfield WFPE-30F. The removable brew basket and water reservoir simplify the cleaning process, helping to maintain hygiene and ensure that every cup of coffee served is fresh and free from contaminants.

In summary, the Bloomfield WFPE-30F represents an excellent choice for businesses looking for a reliable and efficient coffee brewing solution. Its robust features, including sizable capacity, digital temperature controls, programmable settings, and user-friendly design, make it a top contender in the commercial coffee brewing market. By investing in this brewer, establishments can provide consistently high-quality coffee, ultimately enhancing the overall customer experience.