Bloomfield WFPE-30F manual Potential for OIL Splatter

Page 11

6.Insert the BASKET into the FRYPOT. Fill the FRYPOT to the MIN OIL LEVEL line in the BASKET with room-temerature commercial-quality LIQUID SHORTENING.

This requires 30lbs. of oil.

NOTE: This fryer is designed for LIQUID SHORTENING ONLY. DO NOT USE SOLID SHORTENING OR LARD. Solid shortening will solidify in the filter reservoir and filter pump. This condition will render the filter system inoperable. Repairs caused by the use of anything other than liquid shortening are not covered under warranty.

7.Check operation of FRYER and all CONTROLS.

 

14

 

CONTROL HANDLE

 

(SHOWN CLOSED

 

AND LOCKED)

 

COOK

 

13

OFF

COOK

 

 

LEVER

 

14

 

 

CONTROL

 

 

HANDLE

 

 

 

(SHOWN

 

 

 

OPEN)

 

 

17

DRIP

 

 

 

PAN

 

DRAIN VALVE

 

DRAIN

 

FILTER

 

VALVE

11

RESERVOIR

 

 

 

LEVER

 

 

LOAD PRODUCT

LOWER BASKET

SLIDE LID

LATCH LID TURN

CONTROL LEVER

REMOVE HANDLE

FORWARD

TO COOK

7.DETERMINE MAXIMUM LOAD WEIGHT: For operational safety, it is very important to determine the maximum load weight for the specific operation. This can be accomplished by starting out with small loads and gradually increasing to the largest load size which allows the operator sufficient time to close and lock the fryer cover handle (item 14) without oil foaming out of the FRYPOT. See OPERATING INSTRUCTIONS, page 10.

POTENTIAL FOR OIL SPLATTER

The weight of product which can be safely cooked in this pressure fryer will vary with oil level, product moisture content, oil temperature, and other various conditions.

FAILURE TO OBSERVE THIS WARNING WILL RESULT IN HOT OIL

RELEASE FROM THE FRYER.

HOT OIL WILL CAUSE SEVERE BURNS ON CONTACT.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Important do not Discard this Manual Electric Pressure Fryer Model WFPE-30FShipping Damage Claim Procedure Limited Warranty StatementElectrical Table of ContentsGeneral Specifications Dimensions CapacitiesLower Control Panel Features and Operating ControlsClosing Cover Fryer Precautions and General Information Safety ProceduresUnpacking and Inspection Installation InstructionsService Technician Installation Notes Equipment SET-UP Electrical Installation Electrical Shock HazardPage Slipping & Falling Hazard / Spilled OIL Slipping and Falling Hazard / Spilled OILPotential for OIL Splatter PRE-HEATING the Fryer SET the Cook Timer and Load ProductOperating Instructions Burn Hazard / HOT OIL SplatterFilter Paper Installation Burn Hazard / HOT OIL Splatter Maintenance InstructionsFiltering OIL Burn Hazard Discarding Used OIL Burn Hazard Filter ReservoirCleaning the Kettle HOT BOIL-OUT Method Cleaning the FryerDaily Cleaning of Fryer Cleaning the ReservoirFryer will not Maintain Pressure TroubleshootingProblem Fryer will not Heat Burn Hazard / HOT OIL Splash / Splatter Problem Filter Pump will not RUNProblem Filter Reservoir Overflows During Filter Cycle Normal Maintenance Items Service Parts ListCustomer Service Data Fryer Accessories PART#Wells Manufacturing Company

WFPE-30F specifications

The Bloomfield WFPE-30F is a state-of-the-art electronic coffee brewer designed to elevate the coffee brewing experience in commercial settings. This model shines with a blend of cutting-edge features, innovative technologies, and high-quality characteristics, making it a popular choice among coffee enthusiasts and professionals alike.

One of the standout features of the WFPE-30F is its impressive capacity, capable of brewing up to 30 cups of coffee at a time. This makes it ideal for busy cafes, restaurants, and offices where a steady supply of freshly brewed coffee is essential. The machine is equipped with a large, easy-to-read water level indicator, ensuring that operators can accurately measure the water required for optimal brewing results.

The WFPE-30F employs advanced digital brewing technology that allows for precise temperature control. Maintaining the perfect brewing temperature is crucial for extracting the best flavors from coffee grounds, and this brewer excels in that aspect. With adjustable brew temperature settings, users can tailor their brewing process to enhance the flavor profiles of different coffee types.

Another notable characteristic is the machine’s programmable brewing functions. Users can set specific brew times, which is especially useful for establishing a consistent coffee schedule during peak hours. This programmability also helps improve efficiency, allowing staff to focus on other tasks while the brewer takes care of coffee preparation.

The WFPE-30F is designed with ease of use in mind. Its user-friendly interface features intuitive controls, making it accessible even for those who are not tech-savvy. Additionally, the brewer's stainless-steel construction not only gives it a sleek appearance but also ensures durability and longevity, essential for any commercial equipment.

Maintenance and cleaning are straightforward with the Bloomfield WFPE-30F. The removable brew basket and water reservoir simplify the cleaning process, helping to maintain hygiene and ensure that every cup of coffee served is fresh and free from contaminants.

In summary, the Bloomfield WFPE-30F represents an excellent choice for businesses looking for a reliable and efficient coffee brewing solution. Its robust features, including sizable capacity, digital temperature controls, programmable settings, and user-friendly design, make it a top contender in the commercial coffee brewing market. By investing in this brewer, establishments can provide consistently high-quality coffee, ultimately enhancing the overall customer experience.
Top Page Image Contents