Bloomfield WFPE-30F manual Cleaning the Reservoir, Daily Cleaning of Fryer

Page 18

7.With the POWER SWITCH in the OFF position, drain the cleaning solution.

NOTE: Allow the solution to cool to 120ºF (49ºC) or less for safe handling. Using a suitable METAL container, drain the cleaning solution until the container is no more than one-half full. Always safely dispose of used cleaning solution as required by local ordinances.

8.Rinse the kettle thoroughly with warm, clean water. Drain into the same container as used to dispose of the cleaning solution.

IMPORTANT: NEVER turn the FILTER PUMP ON with anything other than shortening in the filter reservoir. Water can cause severe oil splatter, as well as damage to the pump and contamination of the cooking oil.

CLEANING THE RESERVOIR

CLEAN THE RESERVOIR ONLY WHEN EMPTY. The reservoir should be cleaned, and the FILTER PAPER replaced, after each day’s filtration, or as needed to return oil promptly to the kettle.

1. Remove the empty FILTER RESERVOIR from the fryer. Discard the used FILTER PAPER.

BURN HAZARD - FILTER RESERVOIR

WHEN REMOVING THE FILTER RESERVOIR AFTER FILTERING OIL,

WEAR INSULATED GLOVES, OR ALLOW IT TIME TO COOL.

The hot oil will quickly heat the reservoir. Serious burns could result from

touching the hot filter reservoir with bare hands

2.Wash the FILTER PAPER HOLDER, FILTER SCREEN, and FILTER RESERVOIR in the dishwasher, or in the sink, using mild soap or detergent.

3.Rinse thoroughly with clean warm water to remove all residue. Be sure to flush out the FILTER RESERVOIR SUCTION TUBE.

4.Dry all parts thoroughly with a non-abrasive cloth.

5.Assemble the RESERVOIR. Use a fresh sheet of filter paper. Refer to section B, page 10.

DAILY CLEANING OF FRYER

1.FRYER EXTERIOR: As required, wash the exterior of the fryer with warm water, mild soap or detergent, and a clean, non-abrasive cloth. Dry with a clean, non-abrasive cloth.

16

Image 18
Contents Electric Pressure Fryer Model WFPE-30F Important do not Discard this ManualLimited Warranty Statement Shipping Damage Claim ProcedureCapacities Table of ContentsGeneral Specifications Dimensions ElectricalFeatures and Operating Controls Lower Control PanelClosing Cover Safety Procedures Fryer Precautions and General InformationInstallation Instructions Service Technician Installation NotesUnpacking and Inspection Electrical Installation Electrical Shock Hazard Equipment SET-UPPage Slipping and Falling Hazard / Spilled OIL Slipping & Falling Hazard / Spilled OILPotential for OIL Splatter Burn Hazard / HOT OIL Splatter SET the Cook Timer and Load ProductOperating Instructions PRE-HEATING the FryerMaintenance Instructions Filter Paper Installation Burn Hazard / HOT OIL SplatterFiltering OIL Burn Hazard Burn Hazard Filter Reservoir Discarding Used OILCleaning the Fryer Cleaning the Kettle HOT BOIL-OUT MethodCleaning the Reservoir Daily Cleaning of FryerTroubleshooting Problem Fryer will not HeatFryer will not Maintain Pressure Problem Filter Pump will not RUN Problem Filter Reservoir Overflows During Filter CycleBurn Hazard / HOT OIL Splash / Splatter Fryer Accessories PART# Service Parts ListCustomer Service Data Normal Maintenance ItemsWells Manufacturing Company

WFPE-30F specifications

The Bloomfield WFPE-30F is a state-of-the-art electronic coffee brewer designed to elevate the coffee brewing experience in commercial settings. This model shines with a blend of cutting-edge features, innovative technologies, and high-quality characteristics, making it a popular choice among coffee enthusiasts and professionals alike.

One of the standout features of the WFPE-30F is its impressive capacity, capable of brewing up to 30 cups of coffee at a time. This makes it ideal for busy cafes, restaurants, and offices where a steady supply of freshly brewed coffee is essential. The machine is equipped with a large, easy-to-read water level indicator, ensuring that operators can accurately measure the water required for optimal brewing results.

The WFPE-30F employs advanced digital brewing technology that allows for precise temperature control. Maintaining the perfect brewing temperature is crucial for extracting the best flavors from coffee grounds, and this brewer excels in that aspect. With adjustable brew temperature settings, users can tailor their brewing process to enhance the flavor profiles of different coffee types.

Another notable characteristic is the machine’s programmable brewing functions. Users can set specific brew times, which is especially useful for establishing a consistent coffee schedule during peak hours. This programmability also helps improve efficiency, allowing staff to focus on other tasks while the brewer takes care of coffee preparation.

The WFPE-30F is designed with ease of use in mind. Its user-friendly interface features intuitive controls, making it accessible even for those who are not tech-savvy. Additionally, the brewer's stainless-steel construction not only gives it a sleek appearance but also ensures durability and longevity, essential for any commercial equipment.

Maintenance and cleaning are straightforward with the Bloomfield WFPE-30F. The removable brew basket and water reservoir simplify the cleaning process, helping to maintain hygiene and ensure that every cup of coffee served is fresh and free from contaminants.

In summary, the Bloomfield WFPE-30F represents an excellent choice for businesses looking for a reliable and efficient coffee brewing solution. Its robust features, including sizable capacity, digital temperature controls, programmable settings, and user-friendly design, make it a top contender in the commercial coffee brewing market. By investing in this brewer, establishments can provide consistently high-quality coffee, ultimately enhancing the overall customer experience.