Installation Instructions, Install Legs | Bloomfield 9421 (SS2-HE)

INSTALLATION INSTRUCTIONS

INSTALL LEGS

The brewer is provided with 4" adjustable legs and rubber feet. Be sure the legs are securely screwed into the base of the brewer, and that the rubber feet are properly installed.

LEVEL THE UNIT

The adjustable legs allow the brewer to be leveled. Set the brewer in its ultimate operating location and check for level with a spirit level Adjust the brewer for level from front-to-rear, and from side- to-side. Be sure all four feet rest firmly on the counter.

PLUMBER’S INSTALLATION INSTRUCTIONS

IMPORTANT:

This equipment must be installed in accordance with the Basic Plumbing Code of the Building Officials and Code Administrators International (BOCA), and the Food Service Sanitation Manual of the Food and Drug Administration (FDA). Also, this equipment installation must comply with all local codes and ordinances.

IMPORTANT:

Brewer must be installed on a water line with a full-flow pressure between 20 psi and 90 psi.

NOTE: If water pressure varies greatly, or exceeds 90 psi at any time, a water pressure regulator must be installed. Plumbing installer must supply the regulator.

Brewer must be connected to a potable water supply. Bloomfield recommends not less than 1/4” copper tubing for installations of 12’ or less, and not less than 3/8” copper tubing for installations exceeding 12’. Brewer should be connected to a COLD water line.

NOTE: DO NOT use a saddle tap for this water line connection.

A shut-off valve must be installed between the main water supply and the brewer. Plumbing installer must supply the shut-off valve. A 1/4-turn ball valve is recommended.

Bloomfield recommends the use of a water strainer to help prevent deposits in the brewing system.

Flush the water line before connecting to the brewer.

ELECTRICIAN’S INSTALLATION INSTRUCTIONS

Brewer requires a dedicated single-phase circuit:

Model 9421 120/240 Volt AC, 50/60 Hz 4-Wire 40 Amps.

IMPORTANT:

Minimum voltage is 208 Volt AC

NOTE:

To enable the installer to make a quality installation and to minimize installation time, these tests and suggestions should be completed before the actual installation is begun.

CAUTION:

Hazard from

Unstable Equipment

Rubber feet must be installed on each leg of the brewer. Legs must be adjusted so that all four feet rest firmly on the counter. Failure to properly install the feet can result in movement of the brewer, which can cause personal injury and/ or damage to the brewer.

SCREW INTO

BREWER

FRAME

ADJUST

FOR

HEIGHT

ATTACH

RUBBER

FEET

Fig. 2 Adjustable Legs

CAUTION:

Electric Shock

Hazard

Brewer must be properly grounded to a reliable earth ground to prevent possible shock hazard. Do not assume a plumbing line will provide such a ground. Electrical shock may cause serious injury.

9421 (SS2-HE) specifications

The Bloomfield 9421, also known as the SS2-HE, is a cutting-edge commercial-grade coffee brewer designed for cafes, restaurants, and other food-service establishments. This versatile machine combines advanced technology with practical features to meet the demands of high-volume coffee production while maintaining exceptional taste and quality.

At the heart of the Bloomfield 9421 is its state-of-the-art brewing technology. The machine employs a precision brewing system that allows for accurate temperature control, ensuring that each batch of coffee is brewed to perfection. With a temperature range of 190°F to 205°F, the brewer can extract the ideal flavor profile from various coffee beans, catering to diverse consumer preferences.

One of the standout features of the Bloomfield 9421 is its ability to brew large quantities of coffee efficiently. With a capacity to brew up to 12 gallons of coffee per hour, it is particularly well-suited for busy establishments that require a fast turnaround. The machine is equipped with twin coffee brew baskets, enabling simultaneous brewing and allowing staff to serve customers promptly during peak hours.

In addition to its brewing capabilities, the Bloomfield 9421 incorporates user-friendly controls. An intuitive digital display provides real-time feedback on brewing parameters, allowing operators to monitor and adjust settings easily. This makes it easier for staff to maintain consistency in coffee quality, which is crucial in building customer loyalty.

Safety and convenience are also prioritized in the design of the Bloomfield 9421. The brewer features a built-in safety shut-off mechanism that activates if water levels drop too low, preventing overheating and potential damage to the machine. Furthermore, its compact design allows for easy integration into various kitchen layouts.

The materials used in the construction of the Bloomfield 9421 are of the highest quality, ensuring durability and longevity. The stainless steel exterior not only provides a sleek and professional appearance but also makes it easy to clean and maintain hygiene standards.

Overall, the Bloomfield 9421 (SS2-HE) is an exceptional choice for any establishment looking to enhance its coffee service. With its robust design, advanced brewing technology, and user-friendly interface, it stands out as a leader in the commercial coffee brewing market. Whether you're serving a fast-paced breakfast crowd or an afternoon coffee break, the Bloomfield 9421 is engineered to deliver quality coffee with every brew.