Cleaning Instructions

CAUTION:

BURN HAZARD

Brewing and serving temperatures of coffee are extremely hot.

Hot coffee will cause serious skin burns.

CAUTION:

SHOCK HAZARD

Do not submerge or immerse brewer in water.

IMPORTANT:

DO NOT use steel wool, sharp objects, or caustic, abrasive or chlorinated cleansers to clean the brewer or airpots.

Cleaning

PROCEDURE: Clean Coffee Brewer

PRECAUTIONS:	Disconnect brewer from electric power.
	Allow brewer to cool.
FREQUENCY:	Daily
TOOLS:	Mild Detergent, Clean Soft Cloth or Sponge
	Bristle Brush, Bottle Brush

1.Disconnect brewer from electric power. Allow brewer to cool before cleaning.

2.Remove airpot.

3.Remove and empty brew chamber.

4.Remove the spray disk from the brew head (See figure 7): Press up on the spray disk ears, then turn the disk to the left to unlatch. Remove the gasket from inside the brew head.

5.Wipe inside of brew head and area around the brew head with a soft clean cloth or sponge moistened with clean water.

6.Wash the spray disk in a sink using warm water and a mild detergent. A bristle brush may be used to clear clogged spray holes. Rinse the spray disk with clean water and allow to air dry.

7.Wash the brew chamber in a sink using warm water and a mild detergent. A bristle brush may be used to clean the inside. Rinse with clean water and allow to air dry.

8.Wipe the exterior of the brewer with a soft clean cloth or sponge moistened with clean water.

10.Reinstall the gasket INSIDE the brew head, then reinstall the spray disk.

11.Reinstall the brew chamber.

12.DO NOT submerge airpots in water. Clean airpots by filling with warm soapy water. Scrub the inside with a bottle brush. Empty and rinse with clean water. Wipe the exterior with a soft clean cloth or sponge moistened with clean water. Invert and allow to air dry.

Procedure is complete