Bloomfield 1040, 1012, 1072 owner manual Cleaning Instructions, Electric Shock Hazard

Page 13

641 75844 Owners Manual E.B.C. Decanter

PROCEDURE: Clean Coffee Brewer

PRECAUTIONS: Disconnect brewer from electric power.

 

Allow brewer to cool.

FREQUENCY:

Daily

TOOLS:

Mild Detergent, Clean Soft Cloth or Sponge

 

Bristle Brush.

 

 

 

 

1.Disconnect brewer from electric power. Allow brewer to cool before cleaning.

2.Remove and empty decanters.

3.Remove and empty brew chamber.

4.Remove the spray disk from the brew head (See figure 8): Press up on the spray disk ears, then turn the disk to the left to unlatch. Remove the gasket from inside the brew head.

5.Wipe inside of brew head and area around the brew head with a soft clean cloth or sponge moistened with clean water.

6.Wash the spray disk in a sink using warm water and a mild detergent. A bristle brush may be used to clear clogged spray holes. Rinse the spray disk with clean water and allow to air dry.

7.Wash the brew chamber in a sink using warm water and a mild detergent. A bristle brush may be used to clean the inside. Rinse with clean water and allow to air dry. For stainless steel brew chambers, be sure the wire rack is properly reinstalled.

8.Wipe the exterior of the brewer with a soft clean cloth or sponge moistened with clean water.

10.Reinstall the gasket INSIDE the brew head, then reinstall the spray disk.

11.Reinstall the brew chamber.

12.Decanters may be washed in a dishwasher or sink.

Procedure is complete

11

CLEANING INSTRUCTIONS

CAUTION:

Burn Hazard

Brewing and serving temperatures of coffee are extremely hot.

Hot coffee will cause serious skin burns.

CAUTION:

Electric Shock

Hazard

Do not submerge or immerse brewer in water.

IMPORTANT:

DO NOT use steel wool, sharp objects, or caustic, abrasive or chlorinated cleansers to clean the brewer.

Fig. 12 Cleaning

Image 13
Contents Electronic Brew Control Warranty Statement Specifications Table of ContentsApplicability Features and Operating Controls Agency Listing Information Precautions and General InformationElectrical Damage Burn HazardPLUMBER’S Installation Instructions Installation InstructionsEquipment Hazard Leveling the UnitELECTRICIAN’S Installation Instructions Installation InstructionsSTART-UP OperationWater Heater Brew Settings Electronic FeaturesBrew Cancel Energizing the BrewerDisable/Enable After Hours Feature Quality TimerOver-Temperature and Temperature Fault Protection After Hours OperationPreparation Brewing CoffeeAutomatic Operation WarmersElectric Shock Hazard Cleaning InstructionsSymptom Possible Cause Suggested Remedy Troubleshooting SuggestionsElectric Shock Hazard Error DetectionWhat to Check Description Corrective Action Servicing Instructions Access PanelsServicing Instructions Temperature AdjustmentDripout Time Adjustment Brew Time AdjustmentRemove Tank LID Assembly Replace Temperature ProbeReplace Faucet Supply Hose Replace SolenoidReplace HOT Water Faucet Coil Repair HOT Water FaucetReplace Controller Controller Hook-UpSET Controller Jumpers Replace Power BoardReplace Keypad Procedure Delime the Water Tank Servicing Instructions Exploded View & Parts List Exploded View & Parts List Exploded View & Parts List Bloomfield Paper Filter pk 1072 Description HOT Water Tank AssemblyDescription Used on Electrical ComponentsInternal Plumbing Components Wiring Diagram Wiring Diagram Wiring Diagram Telephone Fax

1072, 1040, 1012 specifications

Bloomfield 1040, 1012, and 1072 are three models that exemplify advanced technology and features in the realm of versatile machinery and equipment. Each model is tailored to meet specific operational needs while ensuring efficiency and performance.

The Bloomfield 1040 is renowned for its robust design and user-friendly interface. This model incorporates a powerful engine that guarantees high torque and speed, making it ideal for heavy-duty tasks. Its advanced control system allows for precise maneuverability, which is essential for applications in confined spaces. Additionally, the 1040 comes with a high-capacity fuel tank, ensuring prolonged operational time without the need for frequent refueling.

In terms of technology, the 1040 is equipped with state-of-the-art diagnostic capabilities. This feature enables users to monitor the machine's performance in real time, identifying potential issues before they escalate into costly repairs. The model also includes an intuitive digital display that provides vital information such as fuel levels, engine temperature, and maintenance reminders.

The Bloomfield 1012 model focuses on portability and ease of use. Weighing less than many competitors, the 1012 is designed for easy transport, making it perfect for landscaping, construction, and maintenance tasks. Its compact size does not compromise on power, as it features a high-efficiency engine that balances performance with fuel economy.

Moreover, the 1012 integrates wireless connectivity, allowing operators to control and monitor the machine remotely. This advancement significantly enhances productivity by streamlining operations and reducing downtime.

Lastly, the Bloomfield 1072 stands out with its innovative safety features. Equipped with multiple sensors and automated shut-off capabilities, this model prioritizes operator safety. The enhanced visibility offered by its design ensures that users maintain awareness of their surroundings while operating.

Furthermore, the 1072 includes built-in load monitoring systems that aid in preventing overload scenarios, prolonging the lifespan of the equipment.

In conclusion, Bloomfield 1040, 1012, and 1072 each bring unique features and enhancements to the table. Whether users prioritize power, portability, or safety, Bloomfield's commitment to quality and technological advancement ensures that operators will find a suitable solution within this lineup. These models not only enhance productivity but also promote efficiency, making them valuable assets in any operational context.