Servicing Instructions, Temperature Adjustment

SERVICING INSTRUCTIONS (continued)

TEMPERATURE ADJUSTMENT

Unplug power cord or turn circuit breaker OFF. Remove top panel. Remove button plug from front panel.

CAUTION

Electric Shock

Hazard

These procedures involve exposed electrical circuits. These procedures are to be performed by qualified technical personnel only.

Fig. 14 Checking and Adjusting Brew Temperature

Pull vent tube out of tank lid and insert a thermometer of known accuracy in vent hole. Reconnect brewer to electrical power. Place empty container under brew chamber. Energize brewer and pour one decanter (64 oz.) of cold water into pour-over opening. When HEAT light goes out, read the temperature displayed on thermometer.

Adjust WATER TEMP dial on controller; clockwise increases temperature. Refer to Table 1 below for proper brewing temperature based on altitude.

NOTE: Optimum brewing temperature is 195ºF to 205ºF (90ºC to 96ºC).

Maximum temperature setting should be no more than 205ºF

Manual E.B.C. Decanter

TEMP. (ºF)

210

205

200

195

190

0		0
	0
	5

																															BOILING
																															POINT OF
																															WATER
																															IDEAL
																															IDEAL
																															BREWING
																															TEMPERATURE
																															RANGE
																															MAXIMUM
																															TEMPERATURE
		0				0			0		0		0		0			0		0		0		0				0		0	TEMPERATURE
		0				0			0		0		0															0			SETTING
	0				0			0		0		0															0				SETTING
0				5			0			,5		0		0			0		0		0		0			0			0
,				,			,			,5		,0		,5		,0			,5		,0		,5			,			,5
1			1			2				2		3		3		4		4			5		5		6				6
ELEVATION (feet above seal level)

(96ºC).

IMPORTANT:

An electronic temperature controller will maintain temperature within ±2ºF.

To prevent boiling water in the brewer, controller should be adjusted to a maximum temperature equal to the local

641 75844 Owners

Table 1 Boiling Temperature by Altitude

Upon completion, remove thermometer and reinstall vent tube.

boiling temperature minus 2ºF, or 205ºF, whichever is less.

1072, 1040, 1012 specifications

Bloomfield 1040, 1012, and 1072 are three models that exemplify advanced technology and features in the realm of versatile machinery and equipment. Each model is tailored to meet specific operational needs while ensuring efficiency and performance.

The Bloomfield 1040 is renowned for its robust design and user-friendly interface. This model incorporates a powerful engine that guarantees high torque and speed, making it ideal for heavy-duty tasks. Its advanced control system allows for precise maneuverability, which is essential for applications in confined spaces. Additionally, the 1040 comes with a high-capacity fuel tank, ensuring prolonged operational time without the need for frequent refueling.

In terms of technology, the 1040 is equipped with state-of-the-art diagnostic capabilities. This feature enables users to monitor the machine's performance in real time, identifying potential issues before they escalate into costly repairs. The model also includes an intuitive digital display that provides vital information such as fuel levels, engine temperature, and maintenance reminders.

The Bloomfield 1012 model focuses on portability and ease of use. Weighing less than many competitors, the 1012 is designed for easy transport, making it perfect for landscaping, construction, and maintenance tasks. Its compact size does not compromise on power, as it features a high-efficiency engine that balances performance with fuel economy.

Moreover, the 1012 integrates wireless connectivity, allowing operators to control and monitor the machine remotely. This advancement significantly enhances productivity by streamlining operations and reducing downtime.

Lastly, the Bloomfield 1072 stands out with its innovative safety features. Equipped with multiple sensors and automated shut-off capabilities, this model prioritizes operator safety. The enhanced visibility offered by its design ensures that users maintain awareness of their surroundings while operating.

Furthermore, the 1072 includes built-in load monitoring systems that aid in preventing overload scenarios, prolonging the lifespan of the equipment.

In conclusion, Bloomfield 1040, 1012, and 1072 each bring unique features and enhancements to the table. Whether users prioritize power, portability, or safety, Bloomfield's commitment to quality and technological advancement ensures that operators will find a suitable solution within this lineup. These models not only enhance productivity but also promote efficiency, making them valuable assets in any operational context.