AEG 50800 manual Problems occur during use of the dishwasher, Wash results are not satisfactory

Operating Instructions

...problems occur during use of the dishwasher.

Malfunction	Possible Cause		Remedy
	The door of the dishwasher is	Shut the door.
	not closed properly.
	Mains plug is not plugged in.	Insert mains plug.
	House fuse is defective.	Replace fuse.
The programme does		Where dishes are to be
not start.
		washed immediately, for
	In the case of dishwasher
		appliances
	models with start delay
		-	with multidisplay, set the
	timer:
			delay start to 0.
	A start delay is selected.
		-	without multidisplay, can-
			cel the delay start timer.
	The washing compartment is	Only wash cutlery and dishes
	made from rust-free stainless	that are suitable for dish-
	steel. Rust spots in the wash-	washer use.
	ing compartment are due to
Rust spots are visible in	rust particles from external
the washing compart-	sources (rust particles from
ment.	water pipes, pans, cutlery,	Close the lid of the special
	etc.). Remove such spots with
		salt container securely.
	one of the stainless steel
	cleaners that are generally
	available on the market.
There is a whistling	The whistling is not a cause	Use a different brand of
noise during washing.	for concern.	detergent.

...the wash results are not satisfactory.

The dishes are still dirty.

–The wrong wash programme was selected.

–The dishes were loaded is such a way that the wash waster did not reach all items. The racks for the dishes must not be overloaded.

–The filter in the base of the washing compartment is dirty or incor- rectly positioned.

–Detergent was not used or too little was used.

–In the case of scale deposits on the dishes: The special salt container is empty or the water softener is incorrectly adjusted.

–The drain hose is incorrectly laid.

28