AEG 50800 manual Adjusting Rinse Aid Dosing

Page 13

Operating Instructions

4.Fill with rinse aid exactly up to the level marked “max”; this corresponds to a quantity of approx. 140 ml.

5.Close the lid and press until it locks

into place.

6. Wipe up any spilt rinse aid with a cloth. Otherwise too much foam will be formed during the wash.

 

Adjusting Rinse Aid Dosing

3

As the dishes are washed rinse aid is released from the dispenser into

 

the wash water. The dose is factory set at 4, and can be adjusted from

1 to 6. Only change the setting if streaks, milky spots or dried on water marks are visible on glasses or crockery.

0 1. Open the door of the dishwasher.

2.Press the rinse aid compartment release button with your finger.

3. Fully open the rinse aid compartment lid.

4. Set the dose level.

5. Close the lid and press until it locks into place.

6.If rinse aid has run out, wipe up with a cloth.

13

Image 13
Contents Ökofavorit Dear customer Tips on using the appliancePlease read these user instructions carefully Use of the appliance are marked with a clover leafContents Installation and Connection Instructions Installation, Connection and Placing into Operation Safety InstructionsChild Safety Correct Use General SafetyEconomical and Ecological Dishwashing DisposalDisposing of the Packaging Material Disposal of old appliancesAppliance Features and Control Panel Control panel Prior to using for the first timeAdjust Adjust the water softenerSalt Hardness range of the water in your areaFill with special salt Filling with Special Salt for the Water SoftenerUse special salt Place the funnel supplied on the con- tainer openingThat you glasses are clear Filling with Rinse AidWould damage the appliance Fill with rinse aidAdjusting Rinse Aid Dosing Loading cutlery and dishes Daily UseNot be washed in the dishwasher For washing in the dishwasher the following cutlery/dishesLong, pointed items of cutlery Loading CutleryLoad large and heavily soiled dishes in the lower rack Loading Pans, Frying Pans and Large PlatesTo ease the loading of large items at Loading Cups, Glasses Coffee Services Lowering the Upper Basket Type Adjusting the Height of the Upper BasketLowering the Upper Basket Raising the Upper BasketFill with detergent Filling with DetergentBio Wash Programmes and Concentrated Detergents Selecting the Wash Programme Programme Table Start the wash programme Changing/Interrupting/CancellingWash Programme Changing the wash programmeSetting or Changing the Start Delay Timer Load Sensing Sensor Logic Switching Off the DishwasherEmptying the Dishwasher Immediately after the end of the programme. ThereforeCleaning the Filter Care and CleaningPut the flat filter back in the base Washing compartment What to do, whenMalfunction Possible Cause Remedy Error messages are displayedWash results are not satisfactory Problems occur during use of the dishwasherDishes are still dirty Wrong wash programme was selectedDishes are wet and dull Technical DataRinse aid was not used Rinse aid container is empty Lower rinse aid dosingUpper basket Lower basket with cutlery basket Sample loading arrangementsCrushed when the dishwasher is in position Installing the DishwasherFree-Standing Appliances Unscrew the screws 1 from the elbows on the back side Water Connection Connecting the DishwasherPermitted water pressure Connect the inlet hoseDrain hose Water drainExtension hoses Sink outlet connectionElectrical connection Leak Prevention SystemAppliance is automatically pumped out Connections South Africa South AfricaOther Countries Estonia Latavia Poland Cyprus Lebanon OmanHongkong Lthuania Russia Israel Malaysia Saudi ArabiaHungary Thailand Slovakia Rep South AfricaSyria Guarantee Conditions Guarantee ConditionsAutres agences étrangères assurant le service après-vente Further after-sales service agencies overseasWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroService AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG