AEG 50800 manual Connections

Page 36

Installation and Connection Instructions

Connections

The water inlet and drain hoses, as well as the mains cable must be con- nected beside the dishwasher as there is insufficient space behind the appliance.

The plumbing and electrical installation example given below can only be regarded as a recommendation; the actual situation where the dish- washer is to be installed will define the exact installation (available connections, local electricity and water board regulations for connect- ing up appliances, etc.).

Two 45° or Straight Connections,
Outer ø 19 mm, Length 30 mm	Double tap Water drain	Water inlet

Water	Mains	Water	Mains socket	Mains
inlet	cable	drain		cable

Image 36

Contents Ökofavorit Tips on using the appliance Dear customerPlease read these user instructions carefully Use of the appliance are marked with a clover leafContents Installation and Connection Instructions Safety Instructions Installation, Connection and Placing into OperationChild Safety General Safety Correct UseDisposal Economical and Ecological DishwashingDisposing of the Packaging Material Disposal of old appliancesAppliance Features and Control Panel Prior to using for the first time Control panelAdjust the water softener AdjustSalt Hardness range of the water in your areaFilling with Special Salt for the Water Softener Fill with special saltUse special salt Place the funnel supplied on the con- tainer openingFilling with Rinse Aid That you glasses are clearWould damage the appliance Fill with rinse aidAdjusting Rinse Aid Dosing Daily Use Loading cutlery and dishesNot be washed in the dishwasher For washing in the dishwasher the following cutlery/dishesLoading Cutlery Long, pointed items of cutleryLoading Pans, Frying Pans and Large Plates Load large and heavily soiled dishes in the lower rackTo ease the loading of large items at Loading Cups, Glasses Coffee Services Adjusting the Height of the Upper Basket Lowering the Upper Basket TypeLowering the Upper Basket Raising the Upper BasketFilling with Detergent Fill with detergentBio Wash Programmes and Concentrated Detergents Selecting the Wash Programme Programme Table Changing/Interrupting/Cancelling Start the wash programmeWash Programme Changing the wash programmeSetting or Changing the Start Delay Timer Switching Off the Dishwasher Load Sensing Sensor LogicEmptying the Dishwasher Immediately after the end of the programme. ThereforeCare and Cleaning Cleaning the FilterWhat to do, when Put the flat filter back in the base Washing compartmentError messages are displayed Malfunction Possible Cause RemedyProblems occur during use of the dishwasher Wash results are not satisfactoryDishes are still dirty Wrong wash programme was selectedTechnical Data Dishes are wet and dullRinse aid was not used Rinse aid container is empty Lower rinse aid dosingSample loading arrangements Upper basket Lower basket with cutlery basketInstalling the Dishwasher Crushed when the dishwasher is in positionFree-Standing Appliances Unscrew the screws 1 from the elbows on the back side Connecting the Dishwasher Water ConnectionPermitted water pressure Connect the inlet hoseWater drain Drain hoseExtension hoses Sink outlet connectionLeak Prevention System Electrical connectionAppliance is automatically pumped out Connections South Africa South AfricaOther Countries Cyprus Lebanon Oman Estonia Latavia PolandHongkong Lthuania Russia Israel Malaysia Saudi ArabiaThailand Slovakia Rep South Africa HungarySyria Guarantee Conditions Guarantee ConditionsFurther after-sales service agencies overseas Autres agences étrangères assurant le service après-venteWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroService AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG