500 Quick Reference
Quick Reference
LR-500 Look & Listen™ Display
Dots indicate the relative RF | Indicates the currently | |
signal strength. | ||
tuned channel | ||
|
LR-
Indicates the unit is in PROGRAM mode.
To enter PROGRAM mode, press and hold
the UP and DOWN keys until the PGM icon appears in the display. To exit PROGRAM
mode let unit sit idle for 5 seconds. See
page 16 for complete instructions. When the padlock is visible the unit is locked on channel currently displayed. Press and hold SEEK for 5 seconds to unlock or lock.
Battery level indicator. The indi- cator flashes, along with the red LED on top of the unit, to alert you when the battery is low and needs to be charged or changed.
L/O: while in Program mode, this symbol indicates that a channel is locked out and will not be available to the user. Press SEEK to toggle channels between Locked Out and
LR-500 Battery Indicator
All three segments showing: The batteries are at 50% or greater capacity.
Two segments showing: The batteries are at
One segment showing:
Your batteries less than 25% capacity. When this segment begins flashing along with the LED on top of the unit, you should immedi- ately change your batteries or recharge them (if using NiMH batteries).
10