LR-300 Operation Instructions
Make Sure the Unit is On
Rotate the volume knob counterclockwise with an earphone or headset connected to the unit. Listen receivers use the cable of the earphone or headset as a receiving antenna.
Be careful when turning the unit on - if you turn the knob too far you might get too much volume in your earphone!
Find an audio transmission using SEEK
To find a channel on the
Test the audio
If a transmitter is broadcasting on that channel, you will be able to hear the audio. If the signal is too weak, the audio will be muted (squelched).
Adjust the volume control
Use the control dial on the top of the unit to adjust the volume to a comfortable level.
50