Listen Technologies LR-300 Find an audio transmission using Seek, Adjust the volume control

LR-500 Operation Instructions continued

Find an audio transmission using SEEK

Another way to find a channel on the LR-500 is to use the SEEK button. When you do this, the Listen receiver looks for the next active channel. Sometimes the unit will mistake interference for a real broadcast signal. If you get interference, press the SEEK button again. The unit may stop on a channel that is close to the actual broadcast channel, in which case the channel will sound noisy or distorted. Simply press SEEK again until you find the clear- est operating channel.

Adjust the volume control

Use the control dial on the top of the unit to adjust the volume to a comfortable level.

To Lock into Only One Channel

Press and hold the SEEK button for 5 seconds to lock a receiver onto the currently tuned channel. Press and hold the button again to unlock. When locked the LED on top of the unit will flash when you press the SEEK button.

LR-500 Operation

Is the Channel Locked on My Receiver?

On the LR-500, when the channel is locked, the padlock icon will appear on the display. If the unit is locked, the red LED on the top of the unit will flash when

you press the SEEK button.

Padlock appears when locked

If locked, LED flashes on all portable receivers when SEEK button is pressed.