Receiver Troubleshooting continued
I cannot pick up the signal on the receiver.
Check to make sure the receiver and the transmitter are on the same frequency and channel. Also make sure the receiver is in broadcast range of the transmitter.
I can pick up the signal on the receiver, but it sounds like it’s not tuned in.
Check to make sure the transmitter and receiver are on exactly the same channel number/letter. If you’re using the
I’m using another brand of transmitter - how do I tell which channel to use?
Refer to Listen’s Frequency Compatibility Tables (pages
There is not sufficient range.
Make sure you are located as close as possible to the antenna of the transmitter. Try to place the antenna as high as possible and free from obstacles. You can also check the squelch setting; perhaps it is too sensitive. To change this setting, refer page 17
Users keep changing channels.
You can prevent users from changing channels by locking in the channel selection. This is done by pressing and holding the SEEK button for 5 seconds. When the channel is locked, the padlock icon will appear on the
Receiver Troubleshooting
65