LR-400 Setup Instructions continued
Set SQ switch
The SQ switch is inside the battery compartment next to the Battery Select switch. The unit |
|
is shipped with SQ in the ON position. To turn it off, use a small screwdriver or pen to slide |
|
the switch to the OFF position (to the right). See page 58 for more information on SQ. Battery | SQ Select |
Select Switch | Switch |
Place Batteries in Unit
Place two AA batteries in the compartment, making note of the battery polarity shown in the battery compartment, and again verifying that the BATTERY SELECT switch is in the correct position for the batteries you are using. (ALK should be selected for all battery types other than NiMH).
NOTE: Listen uses 1800mAh
Connect an Earphone or Headset
Your headset or earphone will connect to the jack on the top of the unit. Either mono or stereo connectors may be used with a Listen receiver. Make certain you push the plug all the way into the jack.
32