LR-500 Setup Instructions continued
Connect an Earphone or Headset
Your headset or earphone will connect to the jack on the top of the unit. Either mono or stereo connectors may be used with a Listen receiver. Make certain you push the plug all the way into the jack.
Turn the Unit On
Receivers are turned on by rotating the volume | Earphone/Headset jack |
| |
dial counterclockwise. The red LED on top of |
|
the unit should activate and the LCD display |
|
should illuminate. If they do not, make sure you |
|
have installed the batteries correctly and that |
|
you are using fully charged batteries. |
|
Select Channel(s)LCD display will
See page 56 for complete channel selection information. activate when on
Red LED will illuminate when on
Turn volume knob counterclockwise to turn on
Set Squelch
See pages 17 and 18 for squelch and programming information.
Program Channels
see page 16.
13