Cecilware BC302-IT Weekday Time OFF, Weekend Timer ON/OFF, Weekend Time on, Weekend Time OFF

WEEKDAY TIME OFF	WEEKDAY TIME OFF
	##:## #M

Description – The Weekday Time OFF function allows the user to set the required weekday turn OFF time.

WEEKEND TIMER	WEEKEND TIMER
	ON/OFF

Description – The Weekend Timer function allows the system to automatically turn ON at a specified time and turn OFF at a specified time every weekend (Saturday - Sunday).

WEEKEND TIME ON	WEEKEND TIME ON
	##:## #M

escription – The Weekend Time ON function allows the user to set the required weekend turn ON time.

WEEKEND TIME OFF	WEEKEND TIME OFF
	##:## #M

Description – The Weekend Time OFF function allows the user to set the required weekend turn OFF time.

CLOCK SETUP	CLOCK SETUP
	ON/OFF

Description – The Clock Setup function allows the user to adjust (set and calibrate) the systems Real-Time- Clock.

ADJUST SECONDS	ADJUST SECONDS
	DAY HH:MM:##

Description – The Adjust Seconds function allows the user to adjust (set) the systems Real-Time-Clock Seconds placeholder.

ADJUST MINUTES	ADJUST MINUTES
	DAY HH:##:SS

Description – The Adjust Minutes function allows the user to adjust (set) the systems Real-Time-Clock Minutes placeholder.

ADJUST HOURS	ADJUST HOURS
	DAY ##:MM:SS

Description – The Adjust Hours function allows the user to adjust (set) the systems Real-Time-Clock Hours placeholder.

ADJUST DAY	ADJUST DAY
	### HH:MM:SS

Description – The Adjust Day function allows the user to adjust (set) the systems Real-Time-Clock Day placeholder.

CLOCK CALIBRATION CONSTANT	CLOCK CAL CONST
	##

Description – The Clock Calibration Constant function allows the user to calibrate the systems Real-Time- Clock (RTC). Each unit corresponds to approximately five seconds per month. Thus, if the RTC is running five seconds slow per month then the Clock Calibration Constant needs to be increased by one.

Conversely, if the RTC is running five seconds fast per month then the Clock Calibration Constant needs to be decreased by one.

UNITS UNITS

ENGLISH/METRIC

Description – The Units function allows the user to select English (oz, °F) or Metric (mL,°C) units of measure.

DEFAULT VALUES	DEFAULT VALUES
	ARE YOU SURE ?
Description – The Default Values function allows the user to set all	DEFAULT VALUES
system parameters back to their Factory Default Settings. This provides	COMPLETED
a known (reference) configuration for troubleshooting purposes.

11