Cecilware BC302-IT, BC2-IT Specifications Electrical Specifications, Mechanical Specifications

Page 2

SPECIFICATIONS

ELECTRICAL SPECIFICATIONS

MODEL NO.

BC301-IT

BC2-IT

BC302-IT

 

 

 

 

Volts

120/240

120/240

120/240

Watts

4100

6200

6200

 

 

 

 

Amps

18

27

27

Wall Outlet (Receptacle)

6-20R

6-30R

6-30R

Power Cord CE202 – 30A optional

 

 

 

 

 

 

 

All Brew Centers are single phase with 3 wires plus a ground with cord and plug, except Eport 220V, 1 PH, (UROPEAN).

MECHANICAL SPECIFICATIONS

MODEL NO.

BC301-IT (in)

BC2-IT (in)

BC302-IT (in)

 

 

 

 

Tank Capacity (US gal.)

3.1

6.2

6.2

 

 

 

 

Cups/Brew Cycle

12/24/36

2 x 36

2 x 12/24/36

 

 

 

 

Cups/Hour

240

400

400

 

 

 

 

 

 

 

 

Height (includes 4” legs)

31

31

31

Width

9 ¼

18

18

Depth (+2”for ¼"water connection)

17 ½

17 ½

17 ½

 

 

 

 

Ship Weight lbs.

65

105

110

 

 

 

 

START-UP PROCEDURE

1.PLUG THE POWER CORD INTO A PROPER RECEPTACLE.

2.ACTIVATE THE POWER SWITCH ON (Toggle Up), located in the lower left corner in back of Brewer.

3.PUSH THE POWER BUTTON (RED) ON THE TOUCHPAD ON THE FRONT PANEL.

The power switch controls all power including the Heater Elements in the tank and the Warmers. The Brewer will automatically start filling the tank, then it will start to heat up the Water in the tank, until it reaches the proper preset temperature (200°F) (About 20 minutes). The LCD window will display a series of messages:

CECILWARE shows day

NG39A shows time

FILLING shows day TANK shows time

HEATING

shows day

shows temp

shows time

READY shows day TO BREW shows time

4.PLACE PAPER FILTER AND COFFEE IN THE FUNNEL, AND INSERT FUNNEL IN THE BREWER.

5.PUSH THE BREW BUTTON. YOU NEED NOT WAIT FOR THESE MESSAGES TO COME UP FIRST. After the brew button is pressed, when the “READY TO BREW” message comes on, the Brewer automatically begins brewing coffee. The LEDs will light up and stay on during the brewing cycle.

NOTE: THE BREWER CAN BE PROGRAMMED TO START ITSELF UP AT ANY DESIRED TIME AND SHUT ITSELF OFF AT ANY DESIRED TIME, PROVIDED THAT THE MAIN POWER SWITCH IN THE BACK OF THE BREWER IS KEEPT ON (Toggle Up).

RECOMMENDED COFFEE AMOUNT FOR BREWING

2.5oz. for one (1) decanter, ½ US gal. (12 cups) 5 oz. for two (2) decanters, 1 US gal. (24 cups)

7.5oz. for tree (3) decanters, 1½ US gal. (36 cups)

2

Image 2
Contents Single ModelsBC2-IT TwinSTART-UP Procedure Specifications Electrical SpecificationsMechanical Specifications Page Installation and Operating Instructions Modes of Operation Overview To Change Or Reset Parameter ValuesProgramming Instructions Modes of Operation Descriptions Dilution Fill Constant Calibration State Brewing StateBrew Fill Constant Calibration State WarmersService Mode Infusion Time ## Seconds Dilution Delay ### SecondsWater Temperature Soak Time ## SecondsWarmer Power Lockout TemperatureSleep Timer ON/OFF Warmer Timer ON/OFFAdjust Seconds DAY HHMM## Weekend Timer ON/OFFClock Setup ON/OFF Adjust Minutes DAY HH##SSError Mode Parts Identification BC2-IT, BC302-IT Back ViewTOP Cabin Parts Identification Elbow TubeQTY BC2-IT Description To prepare a sanitizing solution Front View BC301-ITTroubleshooting Guide Problem Probable Cause RemedySpecial Components Test and Adjustments Power Safety Relay Test Located inside top cabinTo Adjust Water Flow Rate Cecilware Corporation 120/240V