AEG 34942G installation instructions Description of the Hob Mod G

Page 6

Description of the Hob (Mod. 34942 G)

1 2 3

3

4

1. Hob Top

5

2.Rapid Burner

3.Semi-rapid Burners

4.Double-crown Burner

5.Auxiliary Burner

6.Control knob for back left burner (semi-rapid)

7.Control knob for back right burner (semi-rapid)

8.Control knob for ront right burner (auxiliary)

9.Control knob for central burner (double-crown)

10.Control knob for front right burner (rapid)

10

7

8

9

6

INSTALLATION

Any gas installation must be carried out by a registered CORGI installer, and in accordance with existing rules and regulations.

The relevant instructions are to be found in the second section of this manual.

Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown.

WHEN THE HOB IS FIRST INSTALLED

Once the hob has been installed, it is important to remove any protective materials, which were put on in the factory.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 34942G/35940G/35941G/35944G Installation Child SafetyDuring Use Service Environmental InformationContents Guide to Use the instructions Description of the Hob Mod G Operation HOB BurnersPan Supports Maintenance and CleaningHob Top BurnersSymptom Solution Something Not Working?Service and Spare Parts 0870 5 929Guarantee Conditions European GuaranteeInstructions for the Installer Engineers technical dataBurner Important safety requirements LocationInstallation Gas Connection This book be ignoredCut Out Size BuildingBuilding over a cupboard or drawer Building over a kitchen unit with door Fitting the hob to the worktop Place the sealingElectrical connections This HOB Must be EarthedWiring diagram Permanent ConnectionFault Finding Preliminary Electrical Systems CheckEarth Continuity Check Ignition System / Gas Ignition Check gas supply at burnerPressure Testing CommissioningConversion from Natural Gas to LPG Method
Top Page Image Contents