AEG 34942G installation instructions Something Not Working?, Symptom Solution

Page 9

Something Not Working?

If the hob is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre.

SYMPTOM

SOLUTION

There is no spark when lighting

Check that the unit is plugged in

the gas

and the electrical supply is

 

switched on

 

Check that the RCCB has not

 

tripped (if fitted)

 

Check the mains fuse has not

 

blown

 

Check the burner cap and crown

 

have been replaced correctly, e.g.

 

after cleaning.

The gas ring burns unevenly

Check the main jet is not blocked

 

and the burner crown is clear of

 

food particles.

 

Check the burner cap and crown

 

have been replaced correctly, e.g.

 

after cleaning.

 

 

If after all these checks, your hob still does not operate correctly, contact your local AEG Service Force Centre.

Please note that it will be necessary to provide proof of purchase for any in- guarantee service calls.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

9

Image 9
Contents 34942G/35940G/35941G/35944G Installation Child SafetyDuring Use Environmental Information ServiceContents Guide to Use the instructions Description of the Hob Mod G HOB Burners OperationHob Top Maintenance and CleaningPan Supports BurnersSomething Not Working? Symptom Solution0870 5 929 Service and Spare PartsEuropean Guarantee Guarantee ConditionsEngineers technical data Instructions for the InstallerBurner Location Important safety requirementsInstallation This book be ignored Gas ConnectionCut Out Size BuildingBuilding over a cupboard or drawer Building over a kitchen unit with door Place the sealing Fitting the hob to the worktopThis HOB Must be Earthed Electrical connectionsPermanent Connection Wiring diagramPreliminary Electrical Systems Check Fault FindingEarth Continuity Check Check gas supply at burner Ignition System / Gas IgnitionCommissioning Pressure TestingMethod Conversion from Natural Gas to LPG