Bosch Appliances TRUE, 6806, 6805, 4306, 4302, 6802 manual Operation

10 H

Operation

SHU 3002/3006/3012/3016/4002/4006/4016/4022/4026/4036

Fig. 3-1 Fig. 3-2

The SHU 30** and 40** are both mechanical units that operate using a basic Timer and Selector Switch.

TO OPERATE EITHER MODEL, (a SHU 4006 is shown):

Fig. 3-2.

First select a cycle by pushing the corresponding Cycle Button in. The Cycle Button remains in the indented position until another cycle is chosen.

Now, depress the On/Off Button until it locks in place and the On LED illuminates.

Note: The On lamp will remain illuminated until the On/Off Button is depressed a second time turning the unit off.

If the door is opened during the cycle, the On/Off Button will be reset to off and must again be depressed to re-active the unit.

Fig. 3-1.

Then, turn the Timer Knob slowly clockwise to the start position and release. You will hear the Drain Motor activate.

The Timer Knob will continue to advance clockwise back to the twelve O’clock position until the cycle is complete.

Please note: During the Rinse & Hold Cycle the Timer Knob will only advance to the two O’clock position and then stop, indicating the end of the Rinse & Hold cycle.