Bosch Appliances 6802, TRUE, 6806, 6805, 4306, 4302 NTC is held in place by two locking tabs, items 1

H

21

Fig. 14-13

Cut Away View

1

2

Fig. 14-14

57

NTC Removal

The NTC is held in place by two locking tabs, items 1 and 2.

To remove the NTC from the Heater Assembly, unhook the front tab, item 1, and lift the NTC up slightly on that side, holding the tab open as you lift.

Then unhook the rear tab, item 2, holding it open, while you slide the NTC up and out from the Heater Assembly.

Once the NTC has been removed make sure to retrieve the NTC O-ring from the Heater Assembly if it is not on the NTC when it’s removed.

Service tip: When installing the NTC, apply water to the O-ring so it will seat easier.

To avoid leaks, always make sure the NTC is secure and inserted completely into the Heater Assembly.

Fig. 14-15