Honeywell KMA28 operation manual Table of Contents

Bendix/King

KMA28

Audio Amplifier/Intercom/Marker Beacon Receiver

Table of Contents

1 SECTION I GENERAL INFORMATION			1-1
1.1		INTRODUCTION	1-1
1.2		SCOPE	1-1
1.3		EQUIPMENT DESCRIPTION	1-1
1.4		APPROVAL BASIS -	1-2
1.5		SPECIFICATIONS	1-3
1.6		EQUIPMENT SUPPLIED	1-4
1.7	EQUIPMENT REQUIRED BUT NOT SUPPLIED		1-5
1.8		LICENSE REQUIREMENTS	1-5
2	SECTION II - INSTALLATION		2-1
2.1		GENERAL INFORMATION	2-1
2.1.1		SCOPE	2-1
2.1.2		CERTIFICATION REQUIREMENTS	2-1
2.2	UNPACKING AND PRELIMINARY INSPECTION		2-1
2.3	EQUIPMENT INSTALLATION PROCEDURES		2-1
2.3.1		COOLING REQUIREMENTS	2-1
2.3.2		MOUNTING REQUIREMENTS	2-1
2.3.3		MOUNTING RACK INSTALLATION	2-2
2.3.4		CONNECTOR ASSEMBLY	2-2
2.4	CABLE HARNESS WIRING		2-2
2.4.1		NOISE	2-2
2.4.2		EXISTING KMA-24 INSTALLATION	2-3
2.4.3		EXISTING PS ENGINEERING PMA6000 INSTALLATIONS	2-3
2.4.4		POWER	2-3
2.4.5		COMMUNICATIONS PUSH-TO-TALK	2-3
2.4.6		TRANSMIT INTERLOCK	2-3
2.4.7		"SWAP" MODE	2-4
2.4.8		BACKLIGHTING	2-4
2.4.9		UNSWITCHED INPUTS	2-4
2.4.10		INTERCOM WIRING	2-4
2.4.11		COM 3 AUDIO	2-5
2.4.12		PUBLIC ADDRESS FUNCTION	2-5
2.4.13		PA MUTE (J1, PIN 18)	2-6
2.4.14		CONTROL OUTPUT (J2, PIN 4)	2-6
2.4.15		VOX OVERRIDE (J2, PIN U)	2-6
2.5		MARKER INSTALLATION	2-6
2.5.1		MIDDLE MARKER SENSE	2-6
2.5.2		EXTERNAL MARKER LIGHTS	2-6
2.5.3		MARKER ANTENNA INSTALLATION	2-6
2.6		ADJUSTMENTS	2-7
2.7	COMMUNICATIONS ANTENNA INSTALLATION NOTES		2-7
2.8	WIRELESS TELECOMMUNICATIONS INTERFACE		2-7
2.8.1		HOOK SWITCHES	2-8
2.9		KMA 28 PIN ASSIGNMENTS	2-9
2.10 POST INSTALLATION CHECKOUT			2-10
2.11		UNIT INSTALLATION	2-10

006-10565-0000 Page i Rev. 0, Sept. 2000