Equipment Supplied, Intercom Specifications

	Bendix/King
		KMA28
	Audio Amplifier/Intercom/Marker Beacon Receiver

	Intercom Specifications
Intercom Positions:		6 places (with individual IntelliVOX® circuits)
Music Inputs:		2 (Stereo)
Music Muting:		>-30 dB "Soft Mute" when Com or intercom active.
Distortion:		<1% THD @ 38 mW into 150Ω
		<10% THD @ 70mW into 150 Ω
Mic Freq. Response, 3 dB:		300 Hz - 6000 Hz
Music Freq. Response, 3 dB:		100 Hz - 18kHz
	MARKER	BEACON RECEIVER
Frequency:		75 MHz Crystal Controlled
Sensitivity:		Capable of:
Low:		1000 ∝ Volts (Hard)
High:		200 ∝ Volts (Hard)
		(preset at factory for field application)
Selectivity:		-6 dB at ±10 kHz
		-40 dB at ±120 kHz
External Lamp Output:		9.0 (±2.5 unloaded, at maximum brightness) VDC posi-
		tive when active, max. current 125 mA
MM Sense:		Active high (4.7 VDC ± 0.5V) during Middle Marker
		acquisition, for autopilot use.
1.6 EQUIPMENT SUPPLIED
1 ea. of the following:
	Model		Part Number
	KMA 28		066-01176-0101

KMA 28 Installation Kit, 050-03613-0001, contains the following parts.

	Description	Quantity	Part
			Number
KMA28 install rack		1	071-00164-0001
Top Molex Connector Shell w/key, 44 pin, key 4/5		1	120-425-4402
Bottom Molex Connector Shell w/key, 44 pin, key 7/8		1	120-425-4400
Gold Plated Crimp Pins		88	425-001-0002
4 40 X 7/16 screw w/nyl patch		4	475-440-0007
Grounding strap		1	430-007-0001
6-32	X 3/4 screw php	2	475-632-0038
6-32	Nut Flat	2	475-632-0003
6-32	Lock Nut	2	475-632-0004
Cable Clamp		1	625-001-0002
#6-32 x ½” FHP screw		6	475-632-0012
#6-32 Clip Nut		6	475-630-0002

The KMA 28 install rack may be purchased separately under part number 071-00164-0001.

006-10565-0000

Page 1-4

Rev. 0, Sept. 2000

Intercom Specifications