SPECIFICATIONS
Name | ||||
Model |
|
| ||
External dimensions | W1130 x D875 x H1990 (mm) | |||
Internal dimensions | W870 x D600 x H1280 (mm) | |||
Effective capacity |
| 668 L |
| |
Exterior | Painted steel |
| ||
Interior | Painted steel |
| ||
Outer door | Painted steel |
| ||
Inner door | ABS resin panel with stainless frame, 2 doors | |||
Shelf | Stainless steel, 3 shelves (adjustable) | |||
| W848 x D533 (mm), Load; 50 kg/shelf | |||
Access port | 17 mm diameter, 2 locations (back, bottom left corner) | |||
Insulation | Rigid polyurethane | |||
Compressor | Hermetic type, Output; 1100 W (high stage side), 1100 W (low stage side) | |||
Evaporator | Tube on sheet type | |||
Condenser | Fin and tube type (high stage side), Shell and tube type (low stage side) | |||
Refrigerant | ||||
Temperature controller | Microcomputer control system | |||
Temperature display | Digital display |
| ||
Thermal sensor | Platinum resistance (Pt 1000) | |||
Alarm | High temp. alarm, Low temp. alarm, Power failure alarm | |||
| Filter check, Battery check, Fan motor check | |||
Remote alarm contact | Allowable contact capacity: | 30 V DC, 2 A | ||
Battery | ||||
Accessories | 1 set of key, 1 scraper, 1 stick for air intake port cleaning | |||
Weight | 360 kg |
| 365 kg | |
Voltage booster | None |
| ||
|
|
| ||
Optional component | Inventory rack | |||
| Temperature recorder + Mounting kit | |||
| ||||
| Interface board | |||
| Data acquisition system | |||
Note: |
|
|
|
|
• Design or specifications will be subject to change without notice.
*: Power source of the automatic temperature recorder shall be 220 V.
- 72 - | 30 |
|