Middleby Marshall PS624E installation manual Section Installation, Unloading

SECTION 2

INSTALLATION

NOTE: The oven, when installed, must be electrically grounded in accordance with local codes, or in the ab- sence of local codes, with the National Electrical Code (NEC), or ANSI/NFPA70.

NOTE

There must be adequate clearance between the oven and any adjacent combustible con- struction. Clearance must also be provided for servicing and for operation.

CAUTION

It is recommended that the oven be placed under a ventilation hood for adequate air supply and ventilation.

CAUTION

Do not obstruct the flow of ventilation air to and from your oven. Do not obstruct the fan holes in the rear of the unit.

I. UNLOADING

Your Middleby Marshall PS624-Series Oven is shipped partially assembled. It will arrive in a carton on a crate.

Carton size for a PS624-Series Oven is:

56.3″ (1422 mm) Long ×

41″ (1041 mm) Wide ×

40″ (1013 mm) High

The crate and carton must be examined before signing the Bill of Lading. Report any visible damage to the transport company, and check for the proper number of crates. If apparent damage is found, make arrangements to file a claim against the carrier. Surface Interstate Commerce Regulations (U.S.A.) require that the claim must be initiated by the consignee within 10 days from the date that the shipment is received.

Installer should be qualified to install commercial conveyor ovens, having suitable lifting equipment to prevent personal injury.

8