SECTION 3 OPERATION
"SP LOCK"
Light
Lights when the
set point is locked out from changes.
This setting can
only be changed by service personnel.
OVERTEMP
Light
Lights when the oven
temperature is
greater than 650°F (343°C). Refer to Quick Reference: Troubleshooting in this section.
Temperature
Key
Press this key once
to view the Actual Temperature in the Display.
Display | "HEAT ON" |
Shows the Set Point | Light |
or the Actual Tem- | Lights when the |
perature in degrees | burner is in |
Fahrenheit (F) or | operation. |
Celsius (C). |
|
"SET PT" (setpoint)
Light
Lights when the
set point is shown
in the display.
"ACTUAL TEMP"
Light
Lights when the Actual Temperature is shown in the display.
Service Key
Service use
only.
Unlock Key |
| Set Point Key |
| Press this key | |
Press this key | Up Arrow and Down | together with the |
together with the Set | Unlock Key to allow | |
Point Key to allow the | Arrow Keys | the Set Point to be |
Set Point to be | Press these keys to | changed. |
changed. Changes | adjust the Set Point up or | Changes can only be |
can only be made for | down. If the Set Point will | made for 60 sec- |
60 seconds. | not change, refer to Set | onds. |
| Point Key and Unlock Key |
|
| in this section. |
|
21