APW Wyott EF-30 guide

c.To replace fuse block, remove fuse and disconnect wire leads to the damaged fuse block. Mark disconnected leads to identify them.

d.Replace new fuse block in the same position.

e.Connect leads to corresponding terminal on new fuse block. Check completed circuit against circuit diagram on rear panel.

5.To replace element:

a.Remove screws securing pivotal head cover to pivotal head. Remove pivotal head cover and gasket.

b.Lift up the elements to drain position.

c.Remove thermostat bulb and capillary tube clamps.

d.Remove element support assembly.

e.Disconnect leads to element and mark them for identification.

f.Remove the element retaining nuts inside the pivotal head.

g.Remove element. Mount the new element and reverse steps a through f to reassemble.

6.To replace hi-limit thermostat:

a.Remove pivotal head cover and gasket as in step 5a.

b.Remove hi-limit thermostat bulb and capillary tube clamps from element.

c.Dislodge capillary bushing from hole in pivotal head.

d.Remove bushing and thread the thermostat capillary and bulb through hole in pivotal head.

e.Disconnect leads to the damaged hi-limit thermostat and transfer them to corresponding leads on the new thermostat.

f.Remove screws securing the thermostat.

g.Secure new hi-limit thermostat with screws and reverse steps a through d to reassemble.

7. To replace cycling thermostat:

a.Remove front panel (steps 2a and 2b), rear panel (step 3a), pivotal head cover, and gasket (step 5a).

b.Remove cover on back of end post, located on right rear comer of the unit.

c.Remove thermostat capillary and bulb from the pivotal head as in steps 6b through 6d.

d.Disconnect nuts securing the thermostat coil to end post and to pivotal head. Both are accessible from rear of end post.

e.Disconnect leads to the damaged thermostat and mark them for identification.

f.Remove screws securing the thermostat to front panel.

g.Maneuver the thermostat to rear of the unit (through right side passage) and then into the right side end post (through opening on top panel).

h.Remove thermostat along with bulb and capillary from the opening on back of right side end post.

i.Wind the thermostat coil (supplied with new thermostat) around the capillary of new thermostat, at approximately the same position from bulb as on the damaged thermostat.

Note: The thermostat coil should cover approximately 11” to 12” of capillary length.

j.Wrap the portion of thermostat capillary which is covered by the thermostat coil, into

approximately two turns of 1 ½” to 2” diameter.

k Reassemble the thermostat by reversing steps 7a through 7h.

EF-30 specifications

The APW Wyott EF-30 is a highly efficient countertop electric fryer designed to meet the demands of today's busy commercial kitchens. Known for its reliability and performance, the EF-30 offers a range of features that appeal to restaurant owners and chefs seeking to maximize their cooking capabilities while minimizing operational costs.

One of the standout features of the APW Wyott EF-30 is its generous cooking capacity. With a large tank that can hold up to 30 pounds of oil, the fryer allows for frying large batches of food at once, making it ideal for high-volume operations. This capability ensures that chefs can keep up with customer demand during peak hours, resulting in reduced wait times and improved service.

The EF-30 is equipped with advanced heating technologies that enhance performance and energy efficiency. The fryer utilizes a powerful, immersion-style heating element that heats the oil quickly and evenly, ensuring consistent cooking results across all types of food. The adjustable temperature control allows chefs to set the desired frying temperature, providing flexibility for various menu items from crispy french fries to battered fish.

Safety features are paramount in the design of the APW Wyott EF-30, making it a reliable choice for any kitchen. The fryer includes a built-in thermostat that prevents overheating, ensuring that the oil remains at a safe temperature. An easy-access drain valve is also included, allowing for safe and efficient oil changes without the risk of spills or splatters.

In terms of construction, the EF-30 boasts a durable stainless-steel body that not only provides a sleek appearance but also enhances the unit's longevity and resistance to corrosion. The fryer's compact countertop design makes it suitable for kitchens with limited space, and its portability allows for easy relocation if necessary.

Maintenance of the APW Wyott EF-30 is straightforward, thanks to its removable fry pot and easy-access components. This feature simplifies the cleaning process, helping to maintain high hygiene standards in the kitchen.

Overall, the APW Wyott EF-30 combines performance, safety, and durability, making it a top choice for restaurants and foodservice operations looking to boost their frying capabilities while keeping operational efficiency at the forefront. With its impressive features and user-friendly design, the EF-30 is indeed a valuable asset for any culinary establishment.