Lincoln 1100ADVSVC Conveyor Control Board Replacement, Conveyor Control Board Calibration

Page 22

CONVEYOR CONTROL BOARD - REPLACEMENT

1.Shut off power at main breaker.

2.Remove control panel top and front cover.

3.Disconnect wiring (push on connectors) from control board, note proper location of connectors for reinstallation and exchange boards on the mounting bracket before reinstallation.

4.Remove mounting screws from control assembly.

5.Reassemble in reverse order and check system operation.

NOTE: Be sure that jumper (on conveyor control) is set to the proper (120/240) position.

CONVEYOR CONTROL BOARD - CALIBRATION

1.Connect digital volt meter to the hall effect sensor. Black meter lead connected to black hall effect sensor lead, red meter lead to white hall effect sensor lead.

2.Turn conveyor control knob fully counter clockwise. Loosen knob and align with calibration line and tighten knob.

3.Set knob to one minute setting. Adjust "max" pot on conveyor control to 327.5 Hz.

4.Set control knob to 30 minute setting, and adjust "min" pot on conveyor control to 10.9 Hz. Recheck at one minute and 30 minutes until proper readings are achieved. Seal pots with glyptol or nail polish.

CIRCUIT BREAKER

1.Shut off power at main breaker.

2.Remove control panel top and front panel.

3.Disconnect two (2) wires from circuit breaker.

4.Remove knurled mounting nut and push out.

5.Reassemble in reverse order.

NOTE: Be sure to reset breaker before operating.

CONVEYOR DRIVE MOTOR - REPLACEMENT

1.Shut off power at main breaker.

2.Remove conveyor.

3.Remove control panel top and front cover.

4.Disconnect wiring from motor and mark for reassembly.

5.Remove coupling from motor drive shaft.

6.Remove 4 screws and remove conveyor motor and mounting bracket.

7.Remove mounting bracket from conveyor motor assembly.

8.Reassemble in reverse order.

REVERSING CONVEYOR DIRECTION

1.Shut off power at main breaker.

2.Remove control panel top.

3.Remove cover from relay box.

4.Reverse wires fastened to terminals A+ and A- on conveyor control board. (See schematic diagram for wire numbers.)

5.Reassemble in reverse order.

22

Impinger II – Advantage Service Manual - Domestic

Image 22
Contents Impinger Conveyor Ovens Table of Contents Sequence of Operations Impinger II AdvantageControl BOX Auto Cool Down Heater CircuitSchematic 1116-000-A, 1117-000-A Schematic 1130-000-A / 1131-000-A Schematic 1132-000-A / 1133-000-A Natural GAS Troubleshooting Guide / GAS OvensPhase LP GASPage With Power on and Thermocouple Leads Attached to the Temperature ControlPage Page Three Phase Troubleshooting Guide / Electric OvensSingle Phase Refer to Proper Schematic for Identified ComponentsWith Power on and Thermocouple Leads Attached to the TemperaturePage Page MOTOR, Main FAN REMOVAL, INSTALLATION, and AdjustmentON/OFF Switch Replacement FAN, MainBurner Blower Motor Replacement Fuse Holder ReplacementTHERMOSTAT, Control BOX HI-LIMIT Replacement High Limit Thermostat ReplacementThermocouple Measurement Chart Burner Transformer ReplacementThermocouple Replacement InformationTemperature Control Potentiometer Replacement Electronic Temperature Control Board ReplacementElectronic Temperature Control Board Calibration Heat Light ReplacementMain Burner Orifice Replacement Temperature Regulation Valve ReplacementHOT Surface Ignitor Replacement Conveyor Control Potentiometer ReplacementConveyor Control Board Calibration Conveyor Control Board ReplacementConveyor Drive Motor Replacement Circuit BreakerTemperature Display Replacement Hall Effect Sensor ReplacementTemperature Display Transformer Replacement Calibration of Temperature DisplayHeating Element Replacement BEARING, ConveyorThis page intentionally left blank Parts / General Letter Part Number DescriptionBlow UP / General Parts / Control BOX 1116-000-A, 1117-000-A Blow UP / Control BOX 1116-000-A, 1117-000-A Parts / Control BOX 1130-000-A Thru 1133-000-A Blow UP / Control BOX 1130-000-A Thru 1133-000-A Parts / Conveyor & Door Blow UP / Conveyor & Door Parts / Oven Back Assembly Blow UP / Oven Back Assembly
Related manuals
Manual 32 pages 25.41 Kb

1117-000-A, 1100ADVSVC specifications

The Lincoln 1100ADVSVC, 1117-000-A is a cutting-edge vehicle model that reflects the perfect blend of luxury, performance, and advanced technology. Designed for discerning drivers, this model encapsulates what modern automotive engineering can achieve with a focus on sustainability, comfort, and innovation.

One of the standout features of the Lincoln 1100ADVSVC is its powerful hybrid engine that significantly reduces emissions while delivering exceptional performance. The vehicle combines a traditional internal combustion engine with an electric motor, allowing for seamless transitions between fuel types depending on driving conditions. This dual-system not only enhances fuel efficiency but also provides an engaging driving experience, ensuring that power is readily available whenever needed.

The Lincoln 1100ADVSVC is equipped with Lincoln’s renowned all-wheel-drive system, which offers improved traction and stability on various terrains, making it suitable for both urban environments and adventurous outings. This capability is complemented by an advanced adaptive suspension system that automatically adjusts to road conditions, ensuring a smooth and comfortable ride.

In terms of interior features, the Lincoln 1100ADVSVC boasts a lavishly appointed cabin with premium materials and spacious seating for all passengers. The use of high-end leather, meticulously crafted wood accents, and state-of-the-art infotainment options creates an atmosphere of refined luxury. The expansive touchscreen interface integrates seamlessly with connectivity features, allowing easy access to navigation, music, and communication apps.

Safety remains a top priority with the Lincoln 1100ADVSVC. It comes equipped with numerous advanced safety technologies, including adaptive cruise control, lane departure warning, and automatic emergency braking. These features are designed to not only assist the driver but also prevent accidents, providing peace of mind on every journey.

Another noteworthy characteristic of the Lincoln 1100ADVSVC is its emphasis on driver assistance and semi-autonomous features. With the latest advancements in autonomous driving technology, this model offers options that can significantly reduce the need for manual operation in certain driving situations, paving the way for a more relaxed commuting experience.

Overall, the Lincoln 1100ADVSVC, 1117-000-A represents the pinnacle of modern luxury vehicles. With its stunning aesthetics, robust performance, and innovative technologies, it continues to set new standards in the automotive landscape, appealing to those who seek both extravagance and practicality in their driving experience.