Appliance Feature

Two Temperature Zones

•There are two zones in this appliance divided by a partition.

•Each zone has its independent temperature control and display.

•Each of the two zones can be used to store wine bottles or beverages.

•The upper zone can hold up to 16 bottles or 63 cans.

•The lower zone can hold up to 28 bottles or 77 cans.

•Besides wine shelves made of steel wire, two glass shelves are supplied for your convenience to store beverages. Please keep the shelves that are temporarily not in use in good condition for future use.

Interior Light

•Each zone has its own interior light, which can be switched on or off by pressing the pad (light) on the control panel. Long-life and high efficiency LEDs are installed for durability and energy saving.

Upper Zone

•There are two wine shelves of full depth in the upper zone. Each shelf can holds up to 8 bottles with the bottle necks alternating front to back.

•The second supporting guide in the upper zone (counted from top, see illustration “A” on this page) is not designed for wine shelves. It is for beverage shelves only.

Lower Zone

•There are also two wine shelves of full depth in the lower zone. Each shelf can holds up to 8 bottles with the bottle necks alternating front to back.

•The bottom rack in the lower zone, which consists of two stories, each holds up to 6 bottles with bottle necks facing the front (see illustration below on this page).

Engaged Wine Shelves

•All the wine shelves and glass shelves of full depth have tabs to engage the cabinet on both sides.

•Any of the shelves can be removed to accommodate larger bottles.

To Remove a Shelf:

•Remove all bottles from the shelves.

•Lift the shelve upwards and then gently pull out the shelves.

To Replace a Shelf:

•Place the sides of the shelves back onto the supporting guides of the cabinet and push back until the shelf tabs slide into place.

NOTE: Ensure that the tabs are firmly engaged in place before storing any bottles.