Maytag 6919559A warranty Adjustable Rack select models, Removing the Upper Rack, Adjusters

Page 7
Style may vary by model

Loading

Adjustable Rack (select models)

The Adjustable Upper Rack (select models) can be raised or lowered to accommodate taller plates, platters, pans, etc. optimizing useable space in both upper and lower racks. Full size dinner plates can be loaded in the upper rack if it is in the lower position. Always adjust the upper rack before loading.

To lower the rack:

Adjusters

1. Pull the rack fully out.

2. Place thumbs on each lever on the adjuster while holding rack with hands.

3. Press down on the levers with thumbs and

push rack down. The rack will come to a stop when it is in position.

To raise the rack:

1.Pull the rack fully out.

2.Place hands on both sides and lift up until rack comes to a stop and latches in place.

Notes

• The dishwasher will not operate correctly if the wash arm is not aligned with one of the water inlet holes on back wall of the dishwasher.

•The left and right side adjusters on the racks must both be fully in the upward or downward position for proper connection.

Removing the Upper Rack

The rack can be removed when tall or oversized items need to be loaded into the lower rack. Unload the rack before removing it from the dishwasher.

To remove rack with tab-lock rack stops:

1.Roll the rack 1⁄3 to 1⁄2 of the way out.

2.Locate the rack stops at the end of each track. Squeeze the tab in the middle of the rack stop and pull the rack stop straight out. Take care to support the rack while removing the rack stops.

3. Roll the rack all

Tab Lock

the way out of the Tab Lock

Rack Stop

track and remove

 

from the

 

dishwasher.

 

To replace:

1. Replace the

dishwasher rack by guiding the wheels into the tracks.

2. Push each rack stop squarely into the end of the track until the catch pops into the small hole on the side of the track.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Use & Care Guide Recognize Safety Symbols, Words, Labels SafetyWhat You Need to Know About Safety Instructions Important Safety InstructionsWooden Items Wood may warp, crack or discolor Material Dishwasher SAFE? Special InformationSulfide eggs, mayonnaise and seafood could damage finish Commercial darkening may be removed by detergentGeneral Recommendations Before You StartOperating the Dishwasher Adding a Forgotten ItemUpper Rack Place Setting LoadUtensil Baskets Lower RackTo lower the rack Adjustable Rack select modelsAdjusters Removing the Upper RackRecommended Amount Hot WaterDetergent Rinse AidWASHES/RINSES Cycles, Options and LightsCycles Time Number Cycle DescriptionOption Description USE with Cycles OptionsLights/Display DelayControl Lock Option select models Lights/Display select models Indicator DescriptionStorage/Moving Steel Cleaner*. Rinse immediately and dryLocation Soil Level Treatment Problem TroubleshootingFood soil remains Display time dropsGlasses are cloudy SpottedIf You Need Service Warranty and ServiceDishwasher Warranty What is Not Covered By These WarrantiesGuide d’utilisation et d’entretien Instructions de sécurité importantes SécuritéCe que vous devez savoir sur les instructions de sécurtié Conserver ces instructionsAu lave-vaisselle Non recommandésAluminium Verre OuiUtilisation du lave-vaisselle Recommandations d’ordreConseils d’utilisation Avant de commencerPanier supérieur CouvertsPanier à couverts Split & FitMC certains modèles Panier inférieurPaniers pour ustensiles Panier à Ustensiles Standard, Amovible certains modèlesEnlèvement du panier supérieur Détergent Quantité recommandéeUtilisation du lave-vaisselle Eau chaudeNettoyage Lavage léger Auto CleanLavage intense Lavage normalOption Description Utiliser AvecIndicateurs lumineux/ affichage Delay Démarrage différéOption de verrouillage de Secondes Témoins lumineux/affichage certains modèlesTémoin Lumineux Description Température de l’eau et les options choisiesEntretien et nettoyage Recommandations d’ordre généralRangement/déplacement Emplacement Niveau DE Saleté TraitementDépannage ’arrivée d’eau est inférieure à 49 C 120 F ’ajouter une évacuation ou un remplissageToujours utiliser un agent de rinçage Non périmé, correctement rangé et de haute qualitéPour obtenir les prestations de garantie Si un service après-vente est nécessaireGarantie Lave-vaisselle Ne sont pas couverts par ces garantiesTabla de Materias Guíá de Uso y CuidadoConserve estas Instrucciones Para Referencia Futura SeguridadLo que necesita saber sobre las instrucciones de seguridad Instrucciones Importantes de Seguridad¿RESISTENTE AL Material LAVAVAJILLAS? Informacion Especial Como Agregar un Artículo Olvidado Carga del LavavajillasAntes de Comenzar Funcionamiento del LavavajillasRejilla Superior Cubiertos para 10 PersonasEl borde del soporte Cestilla Auxiliar modelos selectos Rejilla InferiorCestillas de los Utensilios Cestilla de los Utensilios ‘Split & Fit’MR modelos selectosModelos selectos Rejilla AjustableDesmontaje de la Rejilla Superior Manos.AjustadoresAditivo de Enjuague Uso del LavavajillasAgua Caliente DetergenteCiclos Ciclos, Opciones y LucesOpciones Descripcion Ciclos DE USO Opciones de los CiclosLuces/Indicador ‘Delay’ Lavado DiferidoOpción ‘Control Lock’ Bloqueo de Indicador Descripción Luces/Indicador modelos selectosUbicación Nivel DE Suciedad Tratamiento Almacenamiento/MudanzaProblema Problema Solución Para obtener servicio bajo la garantía Garantía del lavavajillasLo que no cubren estas garantías Si necesita servicio

6919559A specifications

The Maytag 6919559A is a kitchen appliance component that plays a crucial role in maintaining the functionality of various models of Maytag refrigerators. This part is often recognized for its durability and reliability, making it a popular choice among homeowners and appliance technicians alike.

One of the main features of the Maytag 6919559A is its advanced cooling technology. This component is designed to enhance the efficiency of the refrigerator's cooling system, ensuring that food items remain fresh for longer periods. The efficient design of this part helps in maintaining optimal temperatures, thereby reducing energy consumption and contributing to lower utility bills.

In addition to its cooling capabilities, the Maytag 6919559A incorporates innovative materials that are resistant to wear and tear. This characteristic is particularly important in kitchen environments where moisture and temperature fluctuations are common. The robust construction ensures that the part can withstand the rigors of daily use, providing long-lasting performance without the need for frequent replacements.

Another noteworthy feature of the Maytag 6919559A is its compatibility with a wide range of Maytag refrigerator models. This versatility makes it a go-to choice for many appliance service professionals, as it can be easily installed in various units without the need for extensive modifications. The part is designed with precision, ensuring a secure fit and optimal performance within the refrigeration system.

The Maytag 6919559A also stands out for its user-friendly design. Many consumers appreciate components that are straightforward to install, and this one does not disappoint. With clear installation guidelines and accessible features, it allows homeowners to undertake repairs with confidence, potentially saving on costly service fees.

Overall, the Maytag 6919559A exemplifies reliability and efficiency in refrigeration technology. Its advanced cooling capabilities, durable construction, compatibility with multiple models, and user-friendly design make it an essential component for maintaining the performance of Maytag refrigerators. Whether you are a homeowner looking to replace a worn part or a professional technician seeking a dependable solution, the Maytag 6919559A is a practical choice that promises to deliver quality and durability for years to come.
Top Page Image Contents