Maytag 6919559A warranty Hot Water, Detergent, Rinse Aid, Recommended Amount

Page 8

Dishwasher Use

Hot Water

For optimal cleaning and drying results, hot water is necessary. The incoming water temperature should be 120° F (49° C) to properly activate the detergent and melt greasy food soils.

To check the incoming water temperature, turn on the hot water faucet nearest the dishwasher and let it run into a glass in the sink. Place a candy thermometer in the glass and check the temperature once it has stopped rising.

Detergent

Use a detergent designed specifically for use in an automatic dishwasher. Be sure it is fresh. Store granular detergent in a cool, dry place (not under the sink).

Recommended Amount

Too little detergent results in poor cleaning, hard water filming/spotting and poor drying. Too much detergent can cause permanent etching/cloudiness.

Suds can cause the dishwasher to overflow. Measure the detergent carefully and use only detergents designed for use in a dishwasher. Less detergent is needed in soft water. Try another brand of detergent if sudsing continues.

The amount of detergent to use is determined by the hardness of the water and soil level of the load. Refer to the following chart for detergent usage recommendations.

WATER

SOIL

PRE-WASH

MAIN WASH

HARDNESS*

LEVEL

DETERGENT

DETERGENT

 

 

 

 

Soft (0-4 gpg)

Light Soil

2 tsp

6 tsp

Normal Soil

4 tsp

6 tsp

 

Heavy Soil

4 tsp

7 tsp

 

 

 

 

Medium (5-9 gpg)

Light Soil

4 tsp

6 tsp

Normal Soil

4 tsp

6 tsp

 

 

Heavy Soil

5 tsp

7 tsp

 

 

 

 

Hard (10-12 gpg)

All Levels

5 tsp

8 tsp

 

 

 

 

*Your local water utility or state university extension service can tell you the degree of water hardness in your area.

In extremely hard water conditions (13 grains per gallon or more*), it is difficult to achieve good results with any dishwasher. A mechanical water

softener may be necessary to improve water quality, detergent effectiveness, and protect the dishwasher parts from the damage that hard water can cause.

Add recommended amount of detergent to each cup as shown and close the detergent lid.

Do not use detergent with the Rinse Only (select models) cycle. Leave the detergent lid open when running Rinse Only (select models).

Rinse Aid

Regular use of a rinse aid improves drying, reduces spotting and filming, and reduces moisture left on the dishwasher interior.

An automatic rinse aid dispenser is located next to the detergent cup.

The window next to the dispenser cap indicates when the rinse aid reservoir needs to be refilled. When the level of rinse aid is below the indicator marks and the window is nearly clear, it is time to refill the dispenser. Check the dispenser monthly.

To add rinse aid to the dispenser, turn the cap counterclockwise to open.

Remove the cap and pour

liquid rinse aid into the opening. The amount of

rinse aid dispensed during

the cycle is adjustable by moving the lever inside the reservoir area. For most water conditions use the manufacturer recommended setting of “2”. Adjust it up to the “MAX” setting for hard water. Set the lever anywhere between these amounts as needed to get the best results. Replace the cap and turn it clockwise to close.

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Use & Care Guide Safety What You Need to Know About Safety InstructionsImportant Safety Instructions Recognize Safety Symbols, Words, LabelsMaterial Dishwasher SAFE? Special Information Sulfide eggs, mayonnaise and seafood could damage finishCommercial darkening may be removed by detergent Wooden Items Wood may warp, crack or discolorBefore You Start Operating the DishwasherAdding a Forgotten Item General RecommendationsPlace Setting Load Upper RackLower Rack Utensil BasketsAdjustable Rack select models AdjustersRemoving the Upper Rack To lower the rackHot Water DetergentRinse Aid Recommended AmountCycles, Options and Lights CyclesTime Number Cycle Description WASHES/RINSESOptions Option Description USE with CyclesControl Lock Option select models DelayLights/Display Indicator Description Lights/Display select modelsLocation Soil Level Treatment Steel Cleaner*. Rinse immediately and dryStorage/Moving Troubleshooting ProblemDisplay time drops Glasses are cloudySpotted Food soil remainsWarranty and Service Dishwasher WarrantyWhat is Not Covered By These Warranties If You Need ServiceGuide d’utilisation et d’entretien Sécurité Ce que vous devez savoir sur les instructions de sécurtiéConserver ces instructions Instructions de sécurité importantesNon recommandés AluminiumVerre Oui Au lave-vaisselleRecommandations d’ordre Conseils d’utilisationAvant de commencer Utilisation du lave-vaisselleCouverts Panier supérieurPanier inférieur Paniers pour ustensilesPanier à Ustensiles Standard, Amovible certains modèles Panier à couverts Split & FitMC certains modèlesEnlèvement du panier supérieur Quantité recommandée Utilisation du lave-vaisselleEau chaude DétergentLavage léger Auto Clean Lavage intenseLavage normal NettoyageUtiliser Avec Option DescriptionOption de verrouillage de Delay Démarrage différéIndicateurs lumineux/ affichage Témoins lumineux/affichage certains modèles Témoin Lumineux DescriptionTempérature de l’eau et les options choisies SecondesRecommandations d’ordre général Rangement/déplacementEmplacement Niveau DE Saleté Traitement Entretien et nettoyageDépannage ’ajouter une évacuation ou un remplissage Toujours utiliser un agent de rinçageNon périmé, correctement rangé et de haute qualité ’arrivée d’eau est inférieure à 49 C 120 FSi un service après-vente est nécessaire Garantie Lave-vaisselleNe sont pas couverts par ces garanties Pour obtenir les prestations de garantieGuíá de Uso y Cuidado Tabla de MateriasSeguridad Lo que necesita saber sobre las instrucciones de seguridadInstrucciones Importantes de Seguridad Conserve estas Instrucciones Para Referencia Futura¿RESISTENTE AL Material LAVAVAJILLAS? Informacion Especial Carga del Lavavajillas Antes de ComenzarFuncionamiento del Lavavajillas Como Agregar un Artículo OlvidadoEl borde del soporte Cubiertos para 10 PersonasRejilla Superior Rejilla Inferior Cestillas de los UtensiliosCestilla de los Utensilios ‘Split & Fit’MR modelos selectos Cestilla Auxiliar modelos selectosRejilla Ajustable Desmontaje de la Rejilla SuperiorManos.Ajustadores Modelos selectosUso del Lavavajillas Agua CalienteDetergente Aditivo de EnjuagueCiclos, Opciones y Luces CiclosOpciones de los Ciclos Opciones Descripcion Ciclos DE USOOpción ‘Control Lock’ Bloqueo de ‘Delay’ Lavado DiferidoLuces/Indicador Luces/Indicador modelos selectos Indicador DescripciónAlmacenamiento/Mudanza Ubicación Nivel DE Suciedad TratamientoProblema Problema Solución Garantía del lavavajillas Lo que no cubren estas garantíasSi necesita servicio Para obtener servicio bajo la garantía

6919559A specifications

The Maytag 6919559A is a kitchen appliance component that plays a crucial role in maintaining the functionality of various models of Maytag refrigerators. This part is often recognized for its durability and reliability, making it a popular choice among homeowners and appliance technicians alike.

One of the main features of the Maytag 6919559A is its advanced cooling technology. This component is designed to enhance the efficiency of the refrigerator's cooling system, ensuring that food items remain fresh for longer periods. The efficient design of this part helps in maintaining optimal temperatures, thereby reducing energy consumption and contributing to lower utility bills.

In addition to its cooling capabilities, the Maytag 6919559A incorporates innovative materials that are resistant to wear and tear. This characteristic is particularly important in kitchen environments where moisture and temperature fluctuations are common. The robust construction ensures that the part can withstand the rigors of daily use, providing long-lasting performance without the need for frequent replacements.

Another noteworthy feature of the Maytag 6919559A is its compatibility with a wide range of Maytag refrigerator models. This versatility makes it a go-to choice for many appliance service professionals, as it can be easily installed in various units without the need for extensive modifications. The part is designed with precision, ensuring a secure fit and optimal performance within the refrigeration system.

The Maytag 6919559A also stands out for its user-friendly design. Many consumers appreciate components that are straightforward to install, and this one does not disappoint. With clear installation guidelines and accessible features, it allows homeowners to undertake repairs with confidence, potentially saving on costly service fees.

Overall, the Maytag 6919559A exemplifies reliability and efficiency in refrigeration technology. Its advanced cooling capabilities, durable construction, compatibility with multiple models, and user-friendly design make it an essential component for maintaining the performance of Maytag refrigerators. Whether you are a homeowner looking to replace a worn part or a professional technician seeking a dependable solution, the Maytag 6919559A is a practical choice that promises to deliver quality and durability for years to come.
Top Page Image Contents