SOYO SY-7IZB+ manual PNP/PCI Configuration Setup, Slot 1/2/3/4 Use IRQ no Used MEM base addr

BIOS Setup Utility			SY-7IZB+
PNP/PCI Configuration Setup (Continued)
PNP/PCI	Setting	Description	Note
Setup

Interrupt	How to set the BIOS to release the IRQ to the PnP Interrupt pool:
Line	PnP / PCI configuration		Integrated Peripherals
IRQ 15	IRQ 15:	PCI / ISA PnP	On-Chip Secondary PCI IDE:		disabled
IRQ 14	IRQ 14:	PCI / ISA PnP	On-Chip Primary PCI IDE:		disabled
			Interrupt 12 will be released by the PnP
IRQ 12	IRQ 12: PCI / ISA PnP		BIOS automatically if the PS/2 Mouse
			Port is not used.
IRQ 7	IRQ 7:	PCI / ISA PnP	Onboard parallel port:	disabled
IRQ 4	IRQ 4:	PCI / ISA PnP	Onboard Serial port 1:	disabled
IRQ 3	IRQ 3:	PCI / ISA PnP	Onboard Serial port 2:	disabled

4.Your OS may reassign another interrupt to a PCI slot after BIOS passes control to the OS, especially if you use Windows 95, 98 or NT.

Slot 1/2/3/4 Use IRQ NO.

Used MEM base addr

Auto		Default
Memory	8K,16K,32K,64K.	This item
length	(Please ask your card	appears only
	provider for the exactly	when the
	memory length of this	[Based MEM
	add-on card.)	base addr] set
		to I/O address.

Assign IRQ For USB

PnP OS Installed

Enabled	BIOS will assign IRQ for	Default
	USB port.
Disabled	BIOS won’ t assign IRQ
	for USB port.
Yes	Set this field to [Yes] if
	you are running
	Windows 95, which is
	PnP compatible.
No	If the OS you are	Default
	running does not	(If there is any
	support PnP	doubt, set this
	configuration.	field to [No])

50