SOYO SY-7IZB+ manual Cooling Fan Installation, CPU Cooling Fan, Chassis Cooling Fan

Hardware Setup SY-7IZB+

Step 9. Cooling Fan Installation

1. CPU Cooling Fan

After you have seated the CPU properly on the processor, attach the 3-pin fan cable to the CPUFAN connector on the Motherboard. The fan will stop when the system enters into Suspend Mode. (Suspend mode can be enabled from the BIOS Setup Utility, [POWER MANAGEMENT] menu.)

To avoid damage to the system, install according to the following pin assignment:

CPU Cooling Fan

CPUFAN Pin Assignment

GND 12V SENSOR

1 2 3

2. Chassis Cooling Fan

Some chassis also feature a cooling fan. This Motherboard features a CHAFAN connector to provide 12V power to the chassis fan. Connect the cable from the chassis fan to the CHAFAN 3-pin connector. Install according to the following pin assignment:

Chassis Cooling Fan

CHAFAN Pin Assignment

1 GND

212V

3 SENSOR

Note: CPUFAN must be installed for this Motherboard,

CHAFAN is optional.

19