Installation Requirements, Tools and Parts

INSTALLATION REQUIREMENTS

Tools and Parts

Tools Needed

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Remove Cardboard Template

The cardboard piece from the top of the microwave oven packaging is perforated. The piece inside the perforation is for use as a rear wall template.

1. Cut along the perforation to separate the template from the

rest of the cardboard packaging.

■Measuring tape

■Pencil

■Masking tape or thumbtacks

■Scissors

■No. 2 Phillips screwdriver

■No. 3 Phillips screwdriver for 1/4-20 x 3" bolts

■Electric drill

■3/16" (5 mm), 3/8" (10 mm) drill bits

■3/4" (19 mm) hole saw

■Stud finder

■7/16" socket wrench

(or box wrench) for 1/4" x 2" lag screws

■1½" (3.8 cm) diam. hole drill bit for wood or metal cabinet

■Keyhole saw

■Caulking gun and weatherproof caulking compound

■Duct tape

2. Set the cardboard template to the side and refer to it during

the “Mark Rear Wall” part of installation.

Location Requirements

Check the opening where the microwave oven will be installed. The location must provide:

■ Minimum installation dimensions. See “Installation

Dimensions” illustration.

■ Minimum one 2" x 4" (50.8 x 101.6 mm) wood wall stud and

minimum 3/8" (9.5 mm) thickness drywall or plaster/lath within

cabinet opening.

■ Support for weight of 150 lbs (68 kg), which includes

microwave oven and items placed inside the microwave oven

and upper cabinet.

Parts Supplied

For reorder information, see “Replacement Parts” section.

NOTE: The hardware items listed here are for wood studs. For other types of wall structures, be sure to use appropriate fasteners.

A B C D E F G

■ Grounded electrical outlet inside upper cabinet. See

“Electrical Requirements” section.

NOTES:

■If installing the microwave oven near a left sidewall, make sure there is at least 6" (15.2 cm) of clearance between the wall and the microwave oven, so that the door can open fully.

■Some cabinet and building materials are not designed to withstand the heat produced by the microwave oven for cooking. Check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damages.

Special Requirements

For Wall Venting Installation Only:

■Cutout must be free of any obstructions so that the vent fits properly, and the damper blade opens freely and fully.

For Roof Venting Installation Only:

A1/4-20 x 3" round-head bolts (2) B. 1/4-20 x 3" flat-head bolts (2) C. Washers (2)

D. Toggle nuts (2)

E. 1/4" x 2" lag screws (2)

F.Sheet metal screws (2)

G. Power supply cord bushing (1)

H. Damper assembly (for wall or roof venting)

Not Shown:

Upper cabinet template

Mounting plate (attached to back of microwave oven)

Cardboard template (part of packaging)

Aluminum grease filters

Charcoal filters (Depending on model, charcoal filters may not be included. See Use and Care Guide.)

■If you are using a rectangular to round transition piece, the 3" (7.6 cm) clearance needs to exist above the microwave oven so that the damper blade can open freely and fully. See “Rectangular to Round Transition” illustration in “Venting Design Specifications” section.

NOTE: Depending on model, aluminum grease filter and charcoal filter may be combined.

Materials needed

■Standard fittings for wall or roof venting. See “Venting Design Specifications” section.

W10191953A specifications

The Maytag W10191953A is a notable appliance part designed to enhance the performance and efficiency of Maytag washing machines. As a quality component, it reflects Maytag's commitment to robust manufacturing and reliability. This part is primarily recognized as a washing machine door strike, playing an essential role in ensuring the proper sealing and functioning of the washer door.

One of the main features of the W10191953A is its durable construction. Made from high-quality materials, the door strike is designed to withstand the rigors of regular use, ensuring longevity and reducing the likelihood of failure. This robustness is crucial in maintaining the operational integrity of the washing machine, preventing leaks, and ensuring that the door remains securely closed during cycles.

In terms of technology, the W10191953A is engineered for compatibility with a variety of Maytag front-load and top-load washing machines. This versatility makes it an essential replacement part for users looking to maintain their appliance’s optimal performance. The installation of this door strike is straightforward and can often be completed without professional assistance, making it accessible for DIY enthusiasts and homeowners.

The W10191953A also features a precise design that ensures an exact fit, which is essential in maintaining the washer's efficiency. When the door strike is working correctly, it facilitates the activation of safety mechanisms within the washing machine, ensuring that cycles cannot start until the door is correctly secured. This not only enhances user safety but also protects the appliance from potential damage.

Another characteristic of the W10191953A is its ability to reduce operational noise. A properly functioning door strike minimizes the rattling and vibrations that can occur during a wash cycle, leading to a quieter laundry experience. This aspect is particularly valued in households where the washing machine is located near living areas.

In summary, the Maytag W10191953A is an essential component that embodies the quality and reliability of Maytag appliances. With its durable construction, compatibility with various models, ease of installation, safety features, and noise-reducing capabilities, it stands out as a vital part for ensuring optimal washing machine performance. For anyone looking to maintain their Maytag washer, the W10191953A is an excellent choice that promises to deliver lasting benefits.