Appendix
Light Bulb Replacement
Cooktop Light
Replace the
1.To replace the bulb(s), first disconnect the power at the main fuse or circuit breaker panel or pull the plug.
2.Remove the screw at the front of the light cover and lower the cover.
3.Be sure the bulb(s) to be replaced are cool before removing. After breaking the adhesive seal, remove the bulb by gently turning. Put in new bulb.
4.Replace the light cover and screw. Connect electrical power to the oven.
Oven Light
Replace the
1.To replace the oven light, first disconnect the power at the main fuse or circuit breaker panel or pull the plug.
2.Remove the top grille by taking out the 2 screws(on the top of outer case. See page 31 for the Removing Charcoal Filter) that hold it in place.
3.Next, remove the screw located above the door near the center of the oven that secures the light housing. Remove the housing and bulb.
4.Insert new bulb. Replace the light housing and screw.
5.Replace the top grille and 2 screws, Connect electrical power to the oven.
30